SKIL 6-in. Carbide Tipped Dado Set (79600)
SKIL 6-in. Carbide Tipped Dado Set (79600)
In Stock - Ready to Ship
Product Details
Product Details
Key Features
Overview
The SKIL 79600 6 In. Carbide Tipped Dado Set is a stacked dado blade set for cutting joinery in wood and wood products. This is a dado set designed for cutting grooves, rabbets, splines, lap joints, and dadoes on compatible table saws and radial arm saws. Model Number 79600. If you need cleaner, repeatable groove cuts without piecing together multiple passes with a standard saw blade, this set is the straightforward way to get there.
What matters here is adjustability. This set is designed to cut grooves from 1/8 inch to 13/16 inch in 1/16 inch increments, which gives you flexibility for cabinet work, shelving, casework, and general woodworking joinery. Instead of being locked into one groove width, you can stack the outer cutters and chippers to match the fit you need for plywood, solid stock, and common joinery tasks.
The cutting edges use alternating top bevel carbide teeth that are induction-hardened for longer life. In plain terms, that means the teeth are built to stay sharp longer than basic steel edges, especially if you are making repeated cuts in wood products. For a dado set, edge life matters because groove cuts put a lot of blade in the material at once. A sharper edge helps reduce cleanup work and keeps the cut more consistent over time.
SKIL also gives these blades a clear anti-stick coating. That is not just a cosmetic add-on. It helps reduce friction and heat, which can mean less bogging down during the cut and smoother performance when you are working through a run of parts. The coating also helps resist rust and oxidation, so the set is easier to keep ready between jobs or between shop sessions.
Fitment is another buying point. The set uses a 5/8 inch arbor and is intended for use with a variety of 8 inch, 9 inch, and 10 inch table saws and radial arm saws. That makes it relevant for woodworkers and contractors already running common stationary saw setups. It is a specialty cutting accessory, not a general-purpose circular saw blade, so the real value is in clean joinery work where width control matters more than ripping speed.
For the buyer, this set makes the most sense if you regularly build cabinets, shelves, boxes, drawer parts, or frame-and-panel assemblies and want a dedicated wood-cutting dado solution. Serious DIYers can absolutely use it, but it is especially useful for anyone doing repeatable shop work where accurate groove widths save time and reduce fitting headaches later.
Built for Clean Joinery Work
This set is made for joinery, not general-purpose cutting. If your work includes grooves for shelving, rabbets for cabinet backs, or lap joints for frames, a dedicated dado blade set gets you there faster and more accurately than trying to fake it with multiple passes.
- 6 inch dado set for woodworking joinery
- Cuts groove widths from 1/8 inch to 13/16 inch in 1/16 inch increments
Stays Sharper Through Repeated Cuts
Carbide teeth are the right call for a dado stack because these cuts load more cutting edge into the material at once. That helps this woodworking blade set hold its edge better during repeated cabinet and casework cuts.
- 36 teeth per blade
- Carbide tooth construction with alternating top bevel design
Set Up for Common Stationary Saws
The 5/8 inch arbor and stated compatibility with 8 inch, 9 inch, and 10 inch table saws and radial arm saws make this a practical shop accessory for woodworkers already running standard saw platforms. It is meant for specialty cutting where fit and repeatability matter.
- 5/8 inch arbor
- Compatible with a variety of 8 inch, 9 inch, and 10 inch table saws and radial arm saws
What's in the Box
- (2) 1/8 inch outside cutters
- (4) 1/8 inch chippers
- (1) 1/16 inch chipper
Key Specifications
| Blade Diameter | 6 in. |
|---|---|
| Arbor Size | 5/8 in. |
| Kerf | 0.11 in. |
| Tooth Count | 36 per blade |
| Tooth Material | Carbide |
| Cut Width Range | 1/8 in. to 13/16 in. |
| Cut Width Increments | 1/16 in. |
| Coating | Anti-stick |
Compatibility
Built For
Pro Tip
When you are matching a groove to sheet goods, do a quick test cut in scrap first and build the stack to fit the actual material, not just the nominal thickness. That saves you from a loose shelf dado or a panel groove that is too tight to assemble cleanly.
Tool Nut's Take
SKIL 79600 6 In. Carbide Tipped Dado Set for Straightforward Shop Joinery
The SKIL 79600 6 In. Carbide Tipped Dado Set gives woodworkers a practical way to cut common joinery widths with carbide edges and broad saw compatibility.
- Who it's for: Woodworkers, cabinet builders, remodelers, and serious DIYers cutting grooves, rabbets, splines, and lap joints on compatible stationary saws.
- Why it stands out: The adjustable 1/8 inch to 13/16 inch cut range in 1/16 inch steps is the real value here, and the carbide teeth plus anti-stick coating make it more shop-friendly than a basic budget stack.
- Worth knowing: This is a specialty joinery blade set, so check your saw's dado capacity and arbor compatibility before you buy.
Common Questions
- What kind of cuts is this dado set made for? It is designed for cutting rabbets, splines, lap joints, dadoes, and other groove-style joinery in wood and wood products.
- What groove widths can it cut? The set is designed to cut from 1/8 inch to 13/16 inch in 1/16 inch increments.
- What saws does it fit? It uses a 5/8 inch arbor and is listed for use with a variety of 8 inch, 9 inch, and 10 inch table saws and radial arm saws.
- Does it have an anti-stick coating? Yes. The blades feature a clear anti-stick coating that helps reduce friction and heat while also helping resist rust and oxidation.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


