SKIL Green Cut Early Entry Attachment (PROMO )
SKIL Green Cut Early Entry Attachment (PROMO )
Out of Stock - Available to Order - Usually ships in 20-30 days
Product Details
Product Details
Key Features
Overview
The SKIL SPT5007-EA Concrete Saw Green Cut Early Entry Attachment Kit is an early entry concrete saw attachment made for the SKIL SPT79A-10 7 inch walk-behind worm drive saw. This is a concrete saw attachment designed for green concrete cutting and early control-joint work. Model Number: SPT5007-EA. If you are cutting fresh concrete and need a setup built for shallow, controlled passes instead of full-depth slab cutting, this is the right kind of accessory.
What matters here is purpose-built function. The kit is designed to enable green cutting on the SPT79A-10 platform, with a stated cutting depth of 1-1/2 inches. That puts it in the right range for early-entry joint cutting, where the goal is to control cracking by getting joints in at the right time, not to brute-force through cured concrete. The included 7 inch segmented green cutting concrete blade is matched to that job, and the blade itself is marked for dry cutting and a maximum speed of 8,700 RPM.
SKIL also did not treat this like a throw-in accessory. The attachment uses stainless steel construction, which makes sense on a part that works low to the slab and takes constant exposure to abrasive dust and rough handling. The kit includes the compression skid plate with anti-spalling slot, which is the kind of detail that matters on early-entry work because edge quality is the whole point. If the slab chips out, you did not save time, you just created patch work.
The rest of the package is about getting the saw set up correctly. A 1-1/2 inch depth stop helps keep the cut consistent, and the wheel assembly hardware is included so the attachment can be fitted as intended. That is important because early-entry cutting is one of those jobs where setup matters as much as raw cutting ability. A tool that tracks cleanly and holds depth predictably is worth more than one that just spins a blade fast.
Compatibility is straightforward. This kit is specifically for the SKIL SPT79A-10 7 inch walk-behind worm drive saw. That clear fitment is a good thing. You are not guessing whether it will work with a range of generic saws or trying to adapt something that was never designed for the machine. If you already run the SPT79A-10 and need to handle green concrete cutting, this is the factory-matched setup.
Who should buy it? Concrete contractors, flatwork crews, and anyone responsible for slab control joints using the SKIL walk-behind saw system. It also makes sense for crews that want a dedicated early-entry attachment instead of piecing together a workaround. If you do not own the SPT79A-10, this is not the product to improvise with. If you do own that saw and need a clean, purpose-built green concrete cutting setup, this kit is the practical way to get there.
Built for Early Slab Work
This kit is aimed at one job: getting the SPT79A-10 ready for green concrete cutting without guesswork. The included attachment parts and matched blade make it a system, not a mix of random pieces.
- Designed for SKIL model SPT79A-10 7 inch walk-behind worm drive saw
- Includes 7 inch segmented green cutting concrete blade and attachment hardware
Blade and Depth Matched to the Job
The blade and attachment specs line up with early-entry cutting instead of general-purpose masonry work. That helps keep the saw doing what it is supposed to do on fresh slab cuts.
- 1-1/2 inch cutting depth for early-entry joint work
- 7/8 inch arbor and 8,700 RPM max blade rating
What's in the Box
- (1) Stainless steel compression skid plate with anti-spalling slot
- (1) 1-1/2 in. depth stop
- (1) Wheel assembly kit
- (1) 7 in. segmented green cutting concrete blade, medium hardness
- (1) T25 Torx bit
Key Specifications
| Tool Type | Green cut early entry attachment kit |
|---|---|
| Compatible Saw Model | SKIL SPT79A-10 |
| Blade Diameter | 7 in. |
| Cutting Depth | 1-1/2 in. |
| Arbor Size | 7/8 in. |
| Max Blade Speed | 8,700 RPM |
| Construction Material | Stainless steel |
| Item Weight | 1.57 kg |
Compatibility
Built For
Pro Tip
Use the included depth stop to set the saw before you hit the slab. On early-entry work, consistent shallow depth is what keeps joints clean and controlled, and it helps you avoid turning a control cut into unnecessary rework.
Tool Nut's Take
SKIL SPT5007-EA Concrete Saw Green Cut Early Entry Attachment Kit for crews already running the SPT79A-10
This is the right buy if you need your SKIL walk-behind saw set up for green concrete cutting without messing around with off-label parts.
- Who it's for: Concrete contractors and slab crews using the SKIL SPT79A-10 for early-entry control joints.
- Why it stands out: It is purpose-built for the saw, includes the blade and attachment parts, and uses stainless steel construction instead of feeling like an afterthought accessory.
- Worth knowing: This is a fitment-specific attachment kit, so its value depends on already owning the SPT79A-10. If that is your saw, this is the clean way to add green cutting capability.
Common Questions
- What saw does this attachment fit? It is designed for the SKIL SPT79A-10 7 inch walk-behind worm drive saw.
- What is the maximum cutting depth? The stated cutting depth is 1-1/2 inches.
- Is this for green concrete cutting? Yes. The kit is specifically intended to enable green concrete cutting on the compatible SKIL saw.
- What blade size does it use? The included blade is 7 inches with a 7/8 inch arbor and a maximum rated speed of 8,700 RPM.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


