Festool 18V MFKC 700 EB-Basic Cordless Module Edge Router, Tool Only (578012)
Festool 18V MFKC 700 EB-Basic Cordless Module Edge Router, Tool Only (578012)
In Stock - Ready to Ship
Product Details
Product Details
Key Features
Overview
The Festool 18V MFKC 700 EB-Basic Cordless Module Edge Router, Tool Only is a battery-powered trim router built for edge banding, laminate trimming, chamfers, roundovers, and small profiles. This is a cordless module edge router designed for precise edge work on cabinets, furniture parts, and installed millwork. Model Number 578012. It ships as a bare tool in a Systainer3, without battery or charger, for users already on the Festool 18V platform.
The MFKC 700 takes the layout of Festool's corded MFK 700 module edge router and moves it to battery power. You still get a slim, one-hand motor body sitting on a wide base, but now you can carry it to a kitchen install, a built-in, or a punch-list fix without hunting for an outlet or running a cord across a finished countertop.
A brushless EC-TEC motor drives the spindle with variable speed from 10,000 to 25,000 RPM. Lower speeds keep larger profile bits and heat-sensitive plastics from burning; higher speeds leave clean edges on hardwood edge banding and veneer. The router accepts 1/4" and 8 mm shank bits with the two included collets, takes bits up to 26 mm in diameter, and a push-button spindle lock makes bit changes a one-wrench job.
Control is the point of a module edge router, and this one is built for it. Fine depth adjustment covers a 9/16" (14 mm) range in 1/256" (0.1 mm) increments, so you can dial a flush-trim bit to just kiss the surface. The base is more than 5-1/8" (130 mm) wide for stable support near edges, and the hard fiber base material resists scratching so it glides over finished surfaces without marking them. Bases change without tools, which keeps setup quick when the job shifts from trimming to chamfering.
Dust control is built in. An integrated extraction channel captures chips at the cutter and feeds a 1-1/16" (27 mm) dust port. Run it with a Festool Bluetooth battery like the 18V 4.0Ah Bluetooth battery pack and the router signals a compatible extractor to start and stop with the tool. Motor temperature monitoring protects the electronics when you are working through a long run of edging.
The MFKC 700 weighs 3.75 lbs (1.7 kg), light enough for one-handed guidance along a panel edge. It runs on any Festool 18V pack, so if you already own Festool cordless drills, sanders, or saws, the batteries already in your rotation power this router too.
Who should buy it? Cabinet installers, finish carpenters, millwork and countertop shops, and serious woodworkers who trim edge banding and laminate regularly and want a dedicated cordless tool that shares their Festool batteries. If you need deep mortising or heavy profile work, a full-size router is the right tool. For precise, clean edge work in finished materials, the MFKC 700 is purpose-built.
Take Edge Work to the Job
No cord means no snag at the end of a panel and no outlet hunt on an install. Set the depth, guide the router, move on.
- Runs on Festool 18V batteries
- Brushless EC-TEC motor, 10,000 to 25,000 RPM
Stable on Narrow Stock
A wide base and a slim motor body keep the router planted on edges and narrow parts, where small trim routers tend to tip.
- Base over 5-1/8" (130 mm) wide
- Hard fiber base resists scratching on finished surfaces
Quick Bit Changes
Press the spindle lock, loosen the collet with the included wrench, and swap bits. Two collets cover both common shank sizes, so the Festool router bits and other edge bits you already own drop right in.
- 1/4" and 8 mm collets included
- Maximum bit diameter 26 mm
Chips in the Hose, Not on the Panel
Chips dragged under the base mar finished surfaces and hide your trim line. The integrated extraction channel pulls them into the hose as you cut.
- 1-1/16" (27 mm) dust extraction port
- Bluetooth auto-start with a Festool Bluetooth battery
What's in the Box
- (1) Festool MFKC 700 EB-Basic Cordless Module Edge Router
- (1) 1/4" collet
- (1) 8 mm collet
- (1) Collet wrench
- (1) Systainer3 SYS3 M 187
Battery and charger sold separately.
At a Glance
Key Specifications
|
|
18V |
|---|---|
|
|
Brushless EC-TEC |
|
|
10,000 - 25,000 RPM |
|
|
1/4" and 8 mm |
|
|
26 mm |
|
|
9/16" (14 mm) |
|
|
1/256" (0.1 mm) |
|
|
Over 5-1/8" (130 mm) |
|
|
1-1/16" (27 mm) |
|
|
3.75 lbs (1.7 kg) |
|
|
Germany |
Compatibility
Built For
Pro Tip
When flush-trimming edge banding, set the bit a hair proud using the fine adjustment, make a test pass on scrap, then drop it in 1/256" steps until it just kisses the panel face. You will skip the sanding that a slightly-too-deep bit leaves behind.
Tool Nut's Take
The Festool MFKC 700 EB-Basic Cordless Edge Router Cuts the Cord on Finish Work
All the control of the MFK 700 with none of the cord, which is exactly what you want on a finished kitchen or a built-in.
- Who it's for: Cabinet installers, finish carpenters, and shops trimming edge banding and laminate who already run Festool 18V batteries.
- Why it stands out: 1/256" depth adjustment, a wide stable base, brushless power, and Bluetooth extractor auto-start in a 3.75 lb tool.
- Worth knowing: This is the Basic version: no battery or charger. Pair it with one of the Festool dust extractors to get the cleanest results on finished surfaces.
Common Questions
- Does it come with a battery? No. The EB-Basic is the bare tool in a Systainer. Any Festool 18V battery and charger will power it.
- What shank sizes does it take? 1/4" and 8 mm, with both collets included.
- How fine is the depth adjustment? The fine adjustment moves in 1/256" (0.1 mm) steps across a 9/16" (14 mm) range.
- Can it start my dust extractor automatically? Yes, when it runs on a Festool Bluetooth battery paired with a compatible Festool extractor.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

