The Festool ETS EC 150/3 EQ-Plus 6-in. Brushless Random Orbital Sander + CT MIDI I HEPA Dust Extractor Bundle pairs the Festool ETS EC 150/3 EQ-Plus 6-in. Brushless Random Orbital Sander with the Festool CT MIDI I HEPA Dust Extractor, then adds the Festool Granat 6-in. (D150) Abrasives 120-Piece Value Set Systainer3 and the Festool SELFCLEAN Filter Bags for CT MIDI I, 5-Pack. This is a sander and HEPA dust extraction bundle designed for dust-free sanding of wood, paint, primer, filler and solid surface. Model number 576326-578512-578192-204308.

Buying the pieces as one system means the setup works on day one. The extractor's anti-static suction hose connects to the ETS EC 150/3's dust port, the Granat 6-in. (D150) Abrasives 120-Piece Value Set Systainer3 loads the sander with 120 Granat 6-in. discs in six grits, P60 through P220, and the five spare SELFCLEAN bags are sized for the CT MIDI I, so you are not shopping for consumables the first week.

Festool ETS EC 150/3 EQ-Plus 6-in. Brushless Random Orbital Sander

The Festool ETS EC150/3 EQ-Plus Random Orbital Sander, Model Number 576326, is a compact 6 inch finish sander built for pros who need a high surface quality without fighting tool weight or vibration all day. This is a random orbital sander designed for fine sanding and ultra-fine finish work. If you spend your time prepping panels, sanding between coats, flattening filler, or dialing in painted and clear-coated surfaces, this is the kind of tool that earns its keep fast.

What makes this model matter is the combination of a 3 mm sanding stroke, a 6 inch pad, and controlled speed from 6,000 to 10,000 RPM. In plain terms, that means it is tuned for finish quality, not aggressive stock removal. The shorter stroke helps reduce visible swirl and leaves a more refined scratch pattern, which is exactly what you want before primer, paint, stain, or topcoat. Festool also calls out constant speed under load, so the tool keeps working consistently instead of falling off when you lean into the surface.

The physical design is a big part of the appeal. Festool built this sander with a very low overall height of 4-1/2 inches and a balanced center of gravity, which gives it a planted feel on the workpiece and better control in awkward positions. That matters on vertical panels, overhead work, and edge sanding where a taller top-heavy sander can feel twitchy. The compact body also makes it easier to keep the pad flat, which is one of the simplest ways to get a better finish.

The EC-TEC brushless motor is another real advantage for anyone who sands a lot. Brushless design helps extend motor life and cuts down on maintenance, and Festool pairs it with a sanding pad brake that uses a carbide tip for longer wear. The brake is there for a reason: it helps prevent the pad from over-revving when the tool is first set down, which can reduce gouging and help protect delicate surfaces at the start of a pass. That is one of those features you appreciate more the more finish work you do.

Dust control is also part of the system here. The tool uses a 1-1/16" (27 mm) dust extraction connection and is designed to work with Festool dust extraction setups for cleaner sanding, better visibility, and less cleanup. Cleaner extraction also means abrasive discs stay more effective and the work surface stays easier to read, which helps when you are chasing surface uniformity instead of just removing material. Festool's approach with this tool is not just about the sander by itself, but about building a more controlled sanding process.

From an ergonomic standpoint, the numbers back up what users notice in hand. Festool lists the machine as weighing 3.53 lbs, while other seller copy highlights the very light working feel of the compact design. Either way, this is a light corded sander in the 6 inch class, and that matters on long sanding sessions. The Vibration Control System is aimed directly at smoother operation and reduced fatigue, which is a practical benefit if you are sanding doors, panels, cabinetry parts, automotive surfaces, or overhead pieces for hours at a time.

This sander is sold as an EQ-Plus kit, which means you are getting more than just the bare tool. In the box is the sander, a 6 inch backing pad, the WAF 5 screwdriver, a Plug-it power cord, and a Systainer3 SYS3 M 187 for storage and transport. That matters for shop organization and for anyone already using Festool storage and corded tool systems. The removable Plug-it cord is especially useful in a busy shop where quick pack-up, cord replacement, and tool changes save time.

Who should buy it? Cabinet shops, finish carpenters, painters doing high-end prep, millwork crews, automotive refinishing users, and serious DIYers who care about surface quality will get the most out of it. If your priority is fast heavy stock removal, you would want a more aggressive stroke. If your priority is clean finish sanding, easy handling, and low-fatigue control, the Festool ETS EC150/3 EQ-Plus Random Orbital Sander is right in its lane.

Festool CT MIDI I HEPA Dust Extractor

Festool 578512 CT MIDI I HEPA Bluetooth Dust Extractor is a compact mobile dust extractor built for contractors, installers, finish carpenters, and serious DIY users who need clean work with less hassle. This is a dust extractor designed for on-site dust collection, cleanup, and tool-connected extraction during sanding, routing, sawing, and drilling. Model Number: 578512. If you want a unit that is easy to move but still has the suction and control features that matter on real jobs, this is the lane the CT MIDI I is built for.

The big reason this extractor stands out is how much performance Festool fits into a small platform. With up to 130 CFM of airflow and a maximum vacuum rating of 96 in static water lift, it is built to keep up with common power tool dust collection tasks and final cleanup without feeling underpowered. The suction is adjustable in five levels, which matters when you are switching between tasks like sanding a painted door, trimming material indoors, or drilling where too much suction can fight the tool.

Festool also got the day-to-day usability right here. The touch controls are simple and easy to use, even when you are wearing gloves or working in dusty conditions. The smooth tapered suction hose is designed to reduce snagging, which is a small detail until you are dragging a hose around finished flooring, around sawhorses, or along a guide rail all day. The flat top gives you a usable storage surface, and the integrated hose garage and cord wrap keep the setup from turning into a pile of hose and cable in the van.

Filter access is another practical improvement. The main filter can be replaced from the outside, and the manual filter cleaning function helps restore airflow when the filter or bag starts to load up. In plain terms, that means you can keep suction where it needs to be and use more of the bag capacity before stopping. For anyone doing repeated sanding or punch-list work inside occupied spaces, that is a real time-saver.

Dust control is only half the story. The CT MIDI I HEPA is also set up to work smarter with your tools. The built-in electrical outlet supports tool-triggered auto-on operation for corded tools, so the extractor starts with the tool instead of forcing you to make a second trip. Integrated Bluetooth expands that to certain cordless setups when used with Bluetooth battery packs or an optional remote control. That makes this extractor a better fit for mixed corded and cordless workflows than a basic shop vacuum.

On portability, this unit lands in a very useful middle ground. It is lighter and easier to carry than a larger extractor, but it still gives you a 4.0 gallon container capacity and 3.3 gallon filter bag capacity. The chassis is built for jobsite movement, with large rear wheels, front casters, and a locking brake to keep it planted once you have it where you need it. Festool also integrates the extractor with its Systainer system through the T-LOC connection, which matters if your workflow already revolves around stacked tool storage and mobile setups.

The wet extraction capability adds flexibility, but there is an important detail: wet extraction requires a special wet filter. The built-in LevelStop system shuts the motor down when collecting water to help protect the machine. That makes this more versatile than a dust-only extractor, but it is still clearly optimized for clean, mobile dust extraction around power tools first.

Who should buy it? If you work inside finished spaces, do installation work, punch-list work, cabinet fitting, trim, door prep, flooring, or light remodeling, this Festool dust extractor makes a lot of sense. It is especially good for users who care about mobility, cleaner indoor work, and better integration with cordless and corded tools. If you need maximum debris capacity for heavy demolition, you would step up in size. If you want a compact extractor that travels well and does the job right, this one is right in the sweet spot.

Festool Granat 6-in. (D150) Abrasives 120-Piece Value Set Systainer3

The Festool 578192 Granat D150 Abrasives 120-Piece Value Set Systainer3 is a 6 inch sanding disc assortment packed in a Festool SYS3 organizer for disc sanders. This is a sanding disc set designed for surface preparation and finish sanding across paints, fillers, plastics, hard substrates, and wood applications. Model Number 578192. If you use a Festool 6" (150 mm) sander and want a full spread of usable grits in one grab-and-go case, this kit makes a lot of sense.

What makes this set useful is the range. You get six grit steps: P60, P80, P120, P150, P180, and P220, with 20 discs of each. That gives you enough stock to move from heavier material removal into surface prep and finish work without piecing together separate boxes. For painters, finish carpenters, cabinet shops, and remodelers, that means fewer interruptions and a simpler sanding progression when the work changes during the day.

Festool SELFCLEAN Filter Bags for CT MIDI I, 5-Pack

The Festool 204308 Self-Cleaning Filter Bags For CT 15 / CT MINI I / CT MIDI I, 5-Pack is a replacement dust extractor filter bag set for select Festool vacuums. This is a dust bag designed for collecting and containing dust and debris during cleanup, sanding, and general extraction work. Model Number 204308. If you use a Festool CT 15, CT MINI I, CT MIDI I, or compatible CTC MINI/MIDI extractor, these bags matter because they help maintain suction while making disposal cleaner and faster.

Who should buy this bundle? Finishers, cabinetmakers, painters and remodelers who sand indoors and want the dust in the bag, not on the floor or in the air. The CT MIDI I is the most compact and portable of the three extractor options, with a 4.0 gal container and 130 CFM of airflow, a good fit for installers who carry the extractor room to room and in and out of the van.

Festool ETS EC 150/3 EQ-Plus 6-in. Brushless Random Orbital Sander

Festool CT MIDI I HEPA Dust Extractor

Festool Granat 6-in. (D150) Abrasives 120-Piece Value Set Systainer3

The sander and the extractor you'd end up buying anyway

The Festool ETS EC 150/3 EQ-Plus 6-in. Brushless Random Orbital Sander + CT MIDI I HEPA Dust Extractor Bundle gets you a complete Festool sander system in one order, with the accessories you would buy next already in the box.

• Who it's for: Finishers, cabinetmakers, painters and remodelers who sand indoors and want the dust in the bag, not on the floor or in the air.
• Why it stands out: The ETS EC 150/3 and the CT MIDI I are built to work together, and the matched Granat Abrasives plus five spare filter bags mean the system is ready to work the day it arrives.
• Worth knowing: The CT MIDI I is the most compact and portable of the three extractor options, with a 4.0 gal container and 130 CFM of airflow, a good fit for installers who carry the extractor room to room and in and out of the van. The same tool is also offered with the other two extractors if you want more capacity or a smaller footprint.

• What kind of sanding is this model best for? It is best for fine and ultra-fine sanding where surface quality matters, thanks to the 3 mm stroke and finish-focused random orbital action.
• Is this a corded or cordless sander? It is a corded sander that runs on 120 VAC and includes a Plug-it power cord.
• Is this a HEPA dust extractor? Yes. The CT MIDI I includes a HEPA filter and is described as a HEPA-certified dust extractor.
• Can it start automatically with a tool? Yes. It has a built-in electrical outlet for corded tool auto-start, and it also supports Bluetooth activation with compatible Festool Bluetooth battery packs or an optional remote control.
• Do the spare filter bags fit the extractor in this bundle? Yes. The 204308 SELFCLEAN filter bags are made for the Festool CT MIDI I, the extractor included in this bundle.