The Festool RO 150 FEQ-Plus Rotex 6-in. Multi-Mode Sander + CT MIDI I HEPA Dust Extractor Bundle pairs the Festool RO 150 FEQ-Plus Rotex 6-in. Multi-Mode Sander with the Festool CT MIDI I HEPA Dust Extractor, then adds the Festool Granat 6-in. (D150) Abrasives 120-Piece Value Set Systainer3 and the Festool SELFCLEAN Filter Bags for CT MIDI I, 5-Pack. This is a sander and HEPA dust extraction bundle designed for dust-free sanding of wood, paint, primer, filler and solid surface. Model number 576028-578512-578192-204308.

Buying the pieces as one system means the setup works on day one. The extractor's anti-static suction hose connects to the RO 150's dust port, the Granat 6-in. (D150) Abrasives 120-Piece Value Set Systainer3 loads the sander with 120 Granat 6-in. discs in six grits, P60 through P220, and the five spare SELFCLEAN bags are sized for the CT MIDI I, so you are not shopping for consumables the first week.

Festool RO 150 FEQ-Plus Rotex 6-in. Multi-Mode Sander

The Festool 576028 RO 150 6" (150 mm) FEQ Rotex Sander w/ Systainer3 is built for woodworkers, finish carpenters, remodelers, and serious DIY users who need one sander that can do real stock removal without giving up finish quality. This is a multi-mode sander designed for coarse sanding, fine sanding, and polishing. Model Number: 576028. If you bounce between flattening rough material, dialing in a finish, and polishing a surface, this tool matters because it replaces multiple single-purpose sanders with one platform.

The big story here is the ROTEX system. In gear-driven rotary mode, the RO 150 is set up for aggressive material removal when you need to level boards, strip finishes, or move through heavy sanding faster. Switch over to eccentric random orbit motion and the same machine becomes a finish sander that is built to leave a higher-quality, scratch-free surface. Festool also calls out polishing as a core use, which makes this a practical choice when you want one corded machine that covers prep work and finish work instead of keeping separate sanders on hand.

The 6" (150 mm) sanding pad gives you a good balance of coverage and control. It is large enough to work efficiently on panels, tabletops, trim assemblies, doors, and broad faces, but still compact enough for site work and tighter areas than bigger dedicated sanding setups. Festool pairs that pad size with a 3/16" (5 mm) sanding stroke, which helps the tool cut fast without turning it into a one-trick roughing machine. On the speed side, the RO 150 runs at 320 to 660 RPM in ROTEX rotary motion and 3,300 to 6,800 RPM in eccentric motion, so you have a clear working range for both removal and finish passes.

Festool also got the layout right for long sanding sessions. The RO 150 FEQ is built with multiple ergonomic grip positions so you can stay planted whether you are working flat, at the edge, or on vertical surfaces. At 5.95 lbs, it is not a featherweight finish sander, but that is the tradeoff for getting the metal gearbox, multi-mode drive system, and the kind of stable feel that helps on heavier sanding tasks. In real use, that added substance is part of why this tool can lean into stock removal instead of skating over the surface.

Dust control is a major reason this sander stands out. The Multi-Jetstream 2 pad design is built to improve dust removal through the pad, and the 1-1/16" (27 mm) dust extraction connection ties the tool into Festool dust collection. Better extraction is not just about keeping the shop cleaner. It helps the abrasive cut more consistently, reduces loading, improves visibility on the work surface, and supports a cleaner finished result. If you do finish prep indoors or on occupied jobsites, that matters a lot.

Another practical feature is the FastFix sanding pad system. Tool-free backing pad changes make this sander easier to adapt when the job changes from aggressive sanding to finer surface work. Festool also includes the Protector, which lets you sand up to adjacent edges with less risk of banging into nearby finished surfaces or trim. That is the kind of feature that sounds small until you are working near cabinet sides, inside built-ins, or along edges you do not want to touch up later.

System-wise, this is a corded 120 VAC Festool tool with a 13.1 ft (4 m) Plug it power cord. It is designed to work as part of the broader Festool sanding and dust extraction setup, including Festool abrasives and compatible dust extractors using the 1-1/16" (27 mm) connection. That system approach is a big part of the value. You are not just buying a sander. You are buying into a sanding workflow that is built around dust control, fast accessory changes, and consistent finish quality.

Who should buy it? If you are a cabinet installer, finish carpenter, furniture builder, remodeler, or detail-focused contractor who sands a lot of wood and wants one serious corded sander to handle both removal and finish work, this one makes sense. If all you need is a light-duty finish sander for occasional touch-up, it is more tool than you need. But if you want a versatile 6 inch random orbit and gear-driven sander that earns its keep across rough prep, finish sanding, and polishing, the RO 150 is one of the most complete options in the Festool lineup.

Rotex sanding generates a steady stream of dust, and pairing this sander with the Festool CT MIDI I HEPA dust extractor keeps that dust out of your lungs and off your finish.

Festool CT MIDI I HEPA Dust Extractor

Festool 578512 CT MIDI I HEPA Bluetooth Dust Extractor is a compact mobile dust extractor built for contractors, installers, finish carpenters, and serious DIY users who need clean work with less hassle. This is a dust extractor designed for on-site dust collection, cleanup, and tool-connected extraction during sanding, routing, sawing, and drilling. Model Number: 578512. If you want a unit that is easy to move but still has the suction and control features that matter on real jobs, this is the lane the CT MIDI I is built for.

The big reason this extractor stands out is how much performance Festool fits into a small platform. With up to 130 CFM of airflow and a maximum vacuum rating of 96 in static water lift, it is built to keep up with common power tool dust collection tasks and final cleanup without feeling underpowered. The suction is adjustable in five levels, which matters when you are switching between tasks like sanding a painted door, trimming material indoors, or drilling where too much suction can fight the tool.

Festool also got the day-to-day usability right here. The touch controls are simple and easy to use, even when you are wearing gloves or working in dusty conditions. The smooth tapered suction hose is designed to reduce snagging, which is a small detail until you are dragging a hose around finished flooring, around sawhorses, or along a guide rail all day. The flat top gives you a usable storage surface, and the integrated hose garage and cord wrap keep the setup from turning into a pile of hose and cable in the van.

Filter access is another practical improvement. The main filter can be replaced from the outside, and the manual filter cleaning function helps restore airflow when the filter or bag starts to load up. In plain terms, that means you can keep suction where it needs to be and use more of the bag capacity before stopping. For anyone doing repeated sanding or punch-list work inside occupied spaces, that is a real time-saver.

Dust control is only half the story. The CT MIDI I HEPA is also set up to work smarter with your tools. The built-in electrical outlet supports tool-triggered auto-on operation for corded tools, so the extractor starts with the tool instead of forcing you to make a second trip. Integrated Bluetooth expands that to certain cordless setups when used with Bluetooth battery packs or an optional remote control. That makes this extractor a better fit for mixed corded and cordless workflows than a basic shop vacuum.

On portability, this unit lands in a very useful middle ground. It is lighter and easier to carry than a larger extractor, but it still gives you a 4.0 gallon container capacity and 3.3 gallon filter bag capacity. The chassis is built for jobsite movement, with large rear wheels, front casters, and a locking brake to keep it planted once you have it where you need it. Festool also integrates the extractor with its Systainer system through the T-LOC connection, which matters if your workflow already revolves around stacked tool storage and mobile setups.

The wet extraction capability adds flexibility, but there is an important detail: wet extraction requires a special wet filter. The built-in LevelStop system shuts the motor down when collecting water to help protect the machine. That makes this more versatile than a dust-only extractor, but it is still clearly optimized for clean, mobile dust extraction around power tools first.

Who should buy it? If you work inside finished spaces, do installation work, punch-list work, cabinet fitting, trim, door prep, flooring, or light remodeling, this Festool dust extractor makes a lot of sense. It is especially good for users who care about mobility, cleaner indoor work, and better integration with cordless and corded tools. If you need maximum debris capacity for heavy demolition, you would step up in size. If you want a compact extractor that travels well and does the job right, this one is right in the sweet spot.

Festool Granat 6-in. (D150) Abrasives 120-Piece Value Set Systainer3

The Festool 578192 Granat D150 Abrasives 120-Piece Value Set Systainer3 is a 6 inch sanding disc assortment packed in a Festool SYS3 organizer for disc sanders. This is a sanding disc set designed for surface preparation and finish sanding across paints, fillers, plastics, hard substrates, and wood applications. Model Number 578192. If you use a Festool 6" (150 mm) sander and want a full spread of usable grits in one grab-and-go case, this kit makes a lot of sense.

What makes this set useful is the range. You get six grit steps: P60, P80, P120, P150, P180, and P220, with 20 discs of each. That gives you enough stock to move from heavier material removal into surface prep and finish work without piecing together separate boxes. For painters, finish carpenters, cabinet shops, and remodelers, that means fewer interruptions and a simpler sanding progression when the work changes during the day.

Festool SELFCLEAN Filter Bags for CT MIDI I, 5-Pack

The Festool 204308 Self-Cleaning Filter Bags For CT 15 / CT MINI I / CT MIDI I, 5-Pack is a replacement dust extractor filter bag set for select Festool vacuums. This is a dust bag designed for collecting and containing dust and debris during cleanup, sanding, and general extraction work. Model Number 204308. If you use a Festool CT 15, CT MINI I, CT MIDI I, or compatible CTC MINI/MIDI extractor, these bags matter because they help maintain suction while making disposal cleaner and faster.

Who should buy this bundle? Finishers, cabinetmakers, painters and remodelers who sand indoors and want the dust in the bag, not on the floor or in the air. The CT MIDI I is the most compact and portable of the three extractor options, with a 4.0 gal container and 130 CFM of airflow, a good fit for installers who carry the extractor room to room and in and out of the van.

Festool RO 150 FEQ-Plus Rotex 6-in. Multi-Mode Sander

Festool CT MIDI I HEPA Dust Extractor

Festool Granat 6-in. (D150) Abrasives 120-Piece Value Set Systainer3

The sander and the extractor you'd end up buying anyway

The Festool RO 150 FEQ-Plus Rotex 6-in. Multi-Mode Sander + CT MIDI I HEPA Dust Extractor Bundle gets you a complete Festool sander system in one order, with the accessories you would buy next already in the box.

• Who it's for: Finishers, cabinetmakers, painters and remodelers who sand indoors and want the dust in the bag, not on the floor or in the air.
• Why it stands out: The RO 150 and the CT MIDI I are built to work together, and the matched Granat Abrasives plus five spare filter bags mean the system is ready to work the day it arrives.
• Worth knowing: The CT MIDI I is the most compact and portable of the three extractor options, with a 4.0 gal container and 130 CFM of airflow, a good fit for installers who carry the extractor room to room and in and out of the van. The same tool is also offered with the other two extractors if you want more capacity or a smaller footprint.

• Is this a random orbit sander or a rotary sander? It is both. The RO 150 uses ROTEX gear-driven rotary motion for aggressive material removal and eccentric random orbit motion for fine sanding, and it can also be used for polishing.
• What size sanding pad does it use? It uses a 6" (150 mm) FastFix sanding pad.
• Is this a HEPA dust extractor? Yes. The CT MIDI I includes a HEPA filter and is described as a HEPA-certified dust extractor.
• Can it start automatically with a tool? Yes. It has a built-in electrical outlet for corded tool auto-start, and it also supports Bluetooth activation with compatible Festool Bluetooth battery packs or an optional remote control.
• Do the spare filter bags fit the extractor in this bundle? Yes. The 204308 SELFCLEAN filter bags are made for the Festool CT MIDI I, the extractor included in this bundle.