The Festool TS 55 FEQ-F-Plus Plunge Cut Track Saw + CT 36 EI HEPA Dust Extractor Bundle pairs the Festool TS 55 FEQ-F-Plus Plunge Cut Track Saw with the Festool CT 36 EI HEPA Dust Extractor, then adds the Festool FS 1400/2 55-in. Guide Rail (Limited Edition Blue) and the Festool SELFCLEAN Filter Bags for CT 36, 5-Pack. This is a plunge cut track saw and HEPA dust extraction bundle designed for straight, splinter-free cuts in sheet goods, doors and solid lumber. Model number 576708-577872-578246-496186.

Buying the pieces as one system means the setup works on day one. The extractor's anti-static suction hose connects to the TS 55's dust port, the FS 1400/2 55-in. Guide Rail (Limited Edition Blue) gives the saw a straight, splinter-free cutting reference long enough for full-width crosscuts on a 4 x 8 sheet, and the five spare SELFCLEAN bags are sized for the CT 36, so you are not shopping for consumables the first week.

Festool TS 55 FEQ-F-Plus Plunge Cut Track Saw

The Festool TS 55 FEQ-F-Plus Plunge Cut Track Saw, Model Number 576708, is built for clean, straight, controlled cuts in sheet goods, doors, flooring, and trim materials. This is a track saw designed for precise plunge cutting, panel breakdown, and finish-quality straight cuts. If you want table-saw-like accuracy in a portable format, this is the tool that gets you there without dragging full-size shop equipment onto the job.

This saw is built around a 1,200 watt motor with a variable no-load speed range of 2,000 to 5,800 RPM. On the job, that gives you the flexibility to match blade speed to the material instead of forcing one setting to do everything. For hardwood panels, plywood, chipboard, plasterboard, and similar stock up to 2-1/8 inches thick, that speed range helps you balance cut finish and feed rate. Festool also calls out increased cutting speed with the updated blade and drive package, which is exactly what pros want from a plunge saw: fast progress without beating up the edge.

Where the TS 55 FEQ-F-Plus really separates itself from an ordinary circular saw is precision. Festool designed this plunge cut track saw so the cutting edge remains unchanged from 90 degrees through 47 degrees of bevel range. That matters when you are fitting panels, scribing fillers, trimming doors, or cutting parts that need to land where you expect them to. The undercut range from -1 degree to 47 degrees adds useful flexibility for detailed installation work, and the preset positions at 0 degrees and 45 degrees speed up common adjustments.

The plunge action, spring-loaded riving knife, and FastFix blade-change setup are all practical features, not brochure filler. The riving knife helps reduce blade binding and makes it easier to re-enter existing kerfs or joints. FastFix makes blade changes quicker when you switch from general panel work to finish cuts. The transparent viewing window and start/end markings help with plunge cut placement, which is especially useful when you are cutting openings or stopping on a line instead of running off an edge.

Dust control is a big part of why track saws earn their keep, and Festool built this one to work as part of a complete low-dust cutting setup. The dust extraction port accepts 1-1/16" and 1-7/16" (27 and 36 mm) connections, and the saw is meant to be paired with Festool extraction and guide rail accessories. The attachable splinter guard is another real-world feature that pays off immediately. When used with a guide rail, it helps produce virtually splinter-free cuts on both sides, which means less rework on veneered plywood, prefinished panels, and visible finish materials.

From a build and handling standpoint, the tool is compact for the category at 10.58 lbs, with a slim housing that allows cuts close to walls and edges. Festool specifically notes clearance as tight as 1/2" (12 mm), which is useful for flooring, built-ins, and finish carpentry where access gets cramped. The 6-1/4 inch blade size keeps the saw maneuverable while still delivering a 2-1/8 inch max cutting depth and 1-11/16 inch depth at 45 degrees. That is enough capacity for most cabinet, remodeling, and interior finish applications this saw is actually bought for.

The bigger story here is system compatibility. The TS 55 FEQ-F-Plus is not just a saw, it is part of Festool's guide rail and dust extraction platform. Pair it with the right rail, blade, extraction hose, and angle accessories and it becomes a repeatable cutting system for cabinetry, built-ins, trim, flooring, and jobsite panel processing. That is why this tool is so popular with cabinet installers, remodelers, finish carpenters, and serious woodworkers who care about cut quality and setup speed.

If you are a general contractor who needs a portable saw for breaking down sheet goods cleanly, a finish carpenter fitting high-visibility material, or a woodworking-focused user who wants better results than a standard circular saw can deliver, this saw makes sense. If all you need is rough framing cuts, it is more saw system than you need. But if clean edges, guided accuracy, bevel consistency, and low-dust operation matter, the Festool TS 55 FEQ-F-Plus Plunge Cut Track Saw is exactly the kind of tool that earns its spot fast.

Building a full track saw system?

Festool CT 36 EI HEPA Dust Extractor

The Festool 577872 CLEANTEC CT 36 EI HEPA Dust Extractor is a professional dust extractor built for workshop dust collection and jobsite cleanup. This is a dust extractor designed for dry and wet extraction, tool-triggered dust collection, and cleaner work around corded and compatible cordless tools. Model Number 577872. If you need one extractor that can handle daily sanding, cutting, drilling, and general cleanup without constantly stopping to empty it, this is the one Festool built to sit right in the middle of your system.

The big selling point here is capacity without the usual penalty in size. Festool gives you a 36-liter container, or nearly 9.5 gallons, while keeping the machine compact enough to move through a shop or around a remodel. That matters when you are collecting dust all day from sanders, track saws, routers, or cleanup work and do not want a small extractor filling up every couple of hours. With up to 138 CFM of airflow and a maximum vacuum rating of 96 inches of static water lift, it has the pull needed for serious dust collection, not just light bench cleanup.

Festool also got the controls right. The touch-style push-button interface is simple to use, and you get five suction levels instead of one fixed setting. That means you can back suction down when a sander wants controlled airflow, or turn it up when you are collecting heavier debris. Tool-triggered operation for corded tools keeps the extractor and tool working together automatically, which is a real time-saver when you are bouncing from cut to cut or moving through repetitive sanding work.

Where this model separates itself from a basic shop vacuum is system integration. The built-in Bluetooth interface lets the extractor start automatically with compatible Festool Bluetooth battery packs or an optional remote control. You can also connect it to the Festool app for support and warning notifications. On the job, that means less walking over to the extractor and less breaking your rhythm. If you already run Festool cordless tools or want cleaner remote startup control, this is a meaningful upgrade over a standard corded extractor.

The physical design is clearly aimed at daily use. The smooth anti-static suction hose is built to reduce snagging, which matters more than it sounds when you are moving around a bench, assembly table, or finished interior. Festool includes integrated hose storage and cord wrap so the setup stays organized instead of turning into a pile of hose and cable at the end of the day. Large wheels make it easier to roll, while the integrated brake keeps it planted once you have it where you want it.

It is also built to function as a hub, not just a vacuum. T-LOC compatibility lets you dock Systainers on top, and Festool also calls out compatibility with the Pre-separator and Workcenter. That gives you one rolling station for extraction, storage, and workflow organization. In a shop, that keeps sanding and cutting accessories together. On a remodel or install job, it cuts down on trips back to the van and helps keep the work area tighter and cleaner.

The included HEPA main filter is a big part of why this extractor matters to pros working indoors, in occupied homes, or anywhere dust control is not optional. Festool rates it for both dry and wet extraction, which adds flexibility when cleanup conditions change during the day. The anti-static setup also helps reduce nuisance static buildup during operation, which makes the overall system feel more refined than a generic jobsite vacuum.

Who should buy it? This extractor makes the most sense for woodworkers, remodelers, finish carpenters, installers, and serious DIY users who already care about cleaner cuts, better sanding results, and less post-job cleanup. If you want the cheapest vacuum possible, this is not that tool. If you want a dust extractor that works like part of a complete Festool workflow and earns its keep every day, the CT 36 EI HEPA is the kind of machine you buy once and use for years.

Festool FS 1400/2 55-in. Guide Rail (Limited Edition Blue)

The Festool 578246 FS 1400 Limited Edition 100th Anniversary Blue Anodized 55" Guide Rail is a precision guide rail for track saw, router, and jigsaw work. This is a guide rail designed for straight, splinter-free cuts and routing grooves. Model Number 578246. If you want cleaner results without dragging big sheet goods across stationary machines, this rail gives you a controlled, repeatable cutting path right where the workpiece sits.

The big reason guys buy a rail like this is accuracy that actually saves time. Festool builds the FS 1400 around a splinter guard positioned directly at the scribe mark, so you can place the rail on your line and cut with less guessing. That matters on finished plywood, veneered panels, interior trim stock, and any job where chipped edges turn into touch-up work. The slideway lining also helps the saw or router move smoothly along the rail, which keeps the cut consistent and makes the whole setup feel more controlled.

Festool SELFCLEAN Filter Bags for CT 36, 5-Pack

The Festool 496186 SELFCLEAN Filter Bag for CT 36 is a replacement dust extractor bag made for Festool CT 36 units. This is a dust extractor filter bag designed for collecting fine dust and debris while maintaining consistent suction. Model Number: 496186. If you run a CT 36 on sanding, cutting, or general cleanup, this bag matters because it helps the extractor keep working efficiently instead of fading off as the bag fills.

Who should buy this bundle? Cabinet installers, remodelers, flooring crews and woodworkers who break down sheet goods and want clean, accurate cuts without a cloud of dust. The CT 36 EI has the largest container of the three, 9.5 gal (36 L), with 138 CFM of airflow for high-volume sanding, sheet goods breakdown and fewer bag changes.

Festool TS 55 FEQ-F-Plus Plunge Cut Track Saw

Power Source	120 VAC corded
Power Consumption	1,200 W
No-Load Speed	2,000 - 5,800 RPM
Blade Diameter	6-5/16" (160 mm)
Max Cutting Depth	2-3/16" (55 mm)
Cutting Depth at 45 Degrees	1-11/16" (43 mm)
Bevel Range	-1 degrees to 47 degrees
Weight	10.6 lb (4.8 kg)
Dust Port Diameter	1-1/16 in / 1-7/16 in (27 / 36 mm)
Cord Length	13.1 ft (4 m)
Made In	Germany

Festool CT 36 EI HEPA Dust Extractor

Festool FS 1400/2 55-in. Guide Rail (Limited Edition Blue)

Saw, rail and extraction in one order

The Festool TS 55 FEQ-F-Plus Plunge Cut Track Saw + CT 36 EI HEPA Dust Extractor Bundle gets you a complete Festool plunge cut track saw system in one order, with the accessories you would buy next already in the box.

• Who it's for: Cabinet installers, remodelers, flooring crews and woodworkers who break down sheet goods and want clean, accurate cuts without a cloud of dust.
• Why it stands out: The TS 55 and the CT 36 are built to work together, and the matched 55-in. Guide Rail plus five spare filter bags mean the system is ready to work the day it arrives.
• Worth knowing: The CT 36 EI has the largest container of the three, 9.5 gal (36 L), with 138 CFM of airflow for high-volume sanding, sheet goods breakdown and fewer bag changes. The same tool is also offered with the other two extractors if you want more capacity or a smaller footprint.

• Is this a corded or cordless track saw? It is a corded 120 VAC track saw.
• What is the maximum cutting depth? Maximum cutting depth is 2-3/16" (55 mm), and depth at 45 degrees is 1-11/16" (43 mm).
• Is this dust extractor rated for wet and dry use? Yes. Festool lists the CT 36 EI HEPA as ideal for both dry and wet extraction.
• Does it support automatic startup with tools? Yes. It supports tool-triggered operation for corded power tools and also has built-in Bluetooth for compatible Festool cordless tools or an optional remote control.
• Do the spare filter bags fit the extractor in this bundle? Yes. The 496186 SELFCLEAN filter bags are made for the Festool CT 36, the extractor included in this bundle.