The Festool TS 55 FEQ-F-Plus Plunge Cut Track Saw + CT MIDI I HEPA Dust Extractor Bundle pairs the Festool TS 55 FEQ-F-Plus Plunge Cut Track Saw with the Festool CT MIDI I HEPA Dust Extractor, then adds the Festool FS 1400/2 55-in. Guide Rail (Limited Edition Blue) and the Festool SELFCLEAN Filter Bags for CT MIDI I, 5-Pack. This is a plunge cut track saw and HEPA dust extraction bundle designed for straight, splinter-free cuts in sheet goods, doors and solid lumber. Model number 576708-578512-578246-204308.

Buying the pieces as one system means the setup works on day one. The extractor's anti-static suction hose connects to the TS 55's dust port, the FS 1400/2 55-in. Guide Rail (Limited Edition Blue) gives the saw a straight, splinter-free cutting reference long enough for full-width crosscuts on a 4 x 8 sheet, and the five spare SELFCLEAN bags are sized for the CT MIDI I, so you are not shopping for consumables the first week.

Festool TS 55 FEQ-F-Plus Plunge Cut Track Saw

The Festool TS 55 FEQ-F-Plus Plunge Cut Track Saw, Model Number 576708, is built for clean, straight, controlled cuts in sheet goods, doors, flooring, and trim materials. This is a track saw designed for precise plunge cutting, panel breakdown, and finish-quality straight cuts. If you want table-saw-like accuracy in a portable format, this is the tool that gets you there without dragging full-size shop equipment onto the job.

This saw is built around a 1,200 watt motor with a variable no-load speed range of 2,000 to 5,800 RPM. On the job, that gives you the flexibility to match blade speed to the material instead of forcing one setting to do everything. For hardwood panels, plywood, chipboard, plasterboard, and similar stock up to 2-1/8 inches thick, that speed range helps you balance cut finish and feed rate. Festool also calls out increased cutting speed with the updated blade and drive package, which is exactly what pros want from a plunge saw: fast progress without beating up the edge.

Where the TS 55 FEQ-F-Plus really separates itself from an ordinary circular saw is precision. Festool designed this plunge cut track saw so the cutting edge remains unchanged from 90 degrees through 47 degrees of bevel range. That matters when you are fitting panels, scribing fillers, trimming doors, or cutting parts that need to land where you expect them to. The undercut range from -1 degree to 47 degrees adds useful flexibility for detailed installation work, and the preset positions at 0 degrees and 45 degrees speed up common adjustments.

The plunge action, spring-loaded riving knife, and FastFix blade-change setup are all practical features, not brochure filler. The riving knife helps reduce blade binding and makes it easier to re-enter existing kerfs or joints. FastFix makes blade changes quicker when you switch from general panel work to finish cuts. The transparent viewing window and start/end markings help with plunge cut placement, which is especially useful when you are cutting openings or stopping on a line instead of running off an edge.

Dust control is a big part of why track saws earn their keep, and Festool built this one to work as part of a complete low-dust cutting setup. The dust extraction port accepts 1-1/16" and 1-7/16" (27 and 36 mm) connections, and the saw is meant to be paired with Festool extraction and guide rail accessories. The attachable splinter guard is another real-world feature that pays off immediately. When used with a guide rail, it helps produce virtually splinter-free cuts on both sides, which means less rework on veneered plywood, prefinished panels, and visible finish materials.

From a build and handling standpoint, the tool is compact for the category at 10.58 lbs, with a slim housing that allows cuts close to walls and edges. Festool specifically notes clearance as tight as 1/2" (12 mm), which is useful for flooring, built-ins, and finish carpentry where access gets cramped. The 6-1/4 inch blade size keeps the saw maneuverable while still delivering a 2-1/8 inch max cutting depth and 1-11/16 inch depth at 45 degrees. That is enough capacity for most cabinet, remodeling, and interior finish applications this saw is actually bought for.

The bigger story here is system compatibility. The TS 55 FEQ-F-Plus is not just a saw, it is part of Festool's guide rail and dust extraction platform. Pair it with the right rail, blade, extraction hose, and angle accessories and it becomes a repeatable cutting system for cabinetry, built-ins, trim, flooring, and jobsite panel processing. That is why this tool is so popular with cabinet installers, remodelers, finish carpenters, and serious woodworkers who care about cut quality and setup speed.

If you are a general contractor who needs a portable saw for breaking down sheet goods cleanly, a finish carpenter fitting high-visibility material, or a woodworking-focused user who wants better results than a standard circular saw can deliver, this saw makes sense. If all you need is rough framing cuts, it is more saw system than you need. But if clean edges, guided accuracy, bevel consistency, and low-dust operation matter, the Festool TS 55 FEQ-F-Plus Plunge Cut Track Saw is exactly the kind of tool that earns its spot fast.

Building a full track saw system?

Festool CT MIDI I HEPA Dust Extractor

Festool 578512 CT MIDI I HEPA Bluetooth Dust Extractor is a compact mobile dust extractor built for contractors, installers, finish carpenters, and serious DIY users who need clean work with less hassle. This is a dust extractor designed for on-site dust collection, cleanup, and tool-connected extraction during sanding, routing, sawing, and drilling. Model Number: 578512. If you want a unit that is easy to move but still has the suction and control features that matter on real jobs, this is the lane the CT MIDI I is built for.

The big reason this extractor stands out is how much performance Festool fits into a small platform. With up to 130 CFM of airflow and a maximum vacuum rating of 96 in static water lift, it is built to keep up with common power tool dust collection tasks and final cleanup without feeling underpowered. The suction is adjustable in five levels, which matters when you are switching between tasks like sanding a painted door, trimming material indoors, or drilling where too much suction can fight the tool.

Festool also got the day-to-day usability right here. The touch controls are simple and easy to use, even when you are wearing gloves or working in dusty conditions. The smooth tapered suction hose is designed to reduce snagging, which is a small detail until you are dragging a hose around finished flooring, around sawhorses, or along a guide rail all day. The flat top gives you a usable storage surface, and the integrated hose garage and cord wrap keep the setup from turning into a pile of hose and cable in the van.

Filter access is another practical improvement. The main filter can be replaced from the outside, and the manual filter cleaning function helps restore airflow when the filter or bag starts to load up. In plain terms, that means you can keep suction where it needs to be and use more of the bag capacity before stopping. For anyone doing repeated sanding or punch-list work inside occupied spaces, that is a real time-saver.

Dust control is only half the story. The CT MIDI I HEPA is also set up to work smarter with your tools. The built-in electrical outlet supports tool-triggered auto-on operation for corded tools, so the extractor starts with the tool instead of forcing you to make a second trip. Integrated Bluetooth expands that to certain cordless setups when used with Bluetooth battery packs or an optional remote control. That makes this extractor a better fit for mixed corded and cordless workflows than a basic shop vacuum.

On portability, this unit lands in a very useful middle ground. It is lighter and easier to carry than a larger extractor, but it still gives you a 4.0 gallon container capacity and 3.3 gallon filter bag capacity. The chassis is built for jobsite movement, with large rear wheels, front casters, and a locking brake to keep it planted once you have it where you need it. Festool also integrates the extractor with its Systainer system through the T-LOC connection, which matters if your workflow already revolves around stacked tool storage and mobile setups.

The wet extraction capability adds flexibility, but there is an important detail: wet extraction requires a special wet filter. The built-in LevelStop system shuts the motor down when collecting water to help protect the machine. That makes this more versatile than a dust-only extractor, but it is still clearly optimized for clean, mobile dust extraction around power tools first.

Who should buy it? If you work inside finished spaces, do installation work, punch-list work, cabinet fitting, trim, door prep, flooring, or light remodeling, this Festool dust extractor makes a lot of sense. It is especially good for users who care about mobility, cleaner indoor work, and better integration with cordless and corded tools. If you need maximum debris capacity for heavy demolition, you would step up in size. If you want a compact extractor that travels well and does the job right, this one is right in the sweet spot.

Festool FS 1400/2 55-in. Guide Rail (Limited Edition Blue)

The Festool 578246 FS 1400 Limited Edition 100th Anniversary Blue Anodized 55" Guide Rail is a precision guide rail for track saw, router, and jigsaw work. This is a guide rail designed for straight, splinter-free cuts and routing grooves. Model Number 578246. If you want cleaner results without dragging big sheet goods across stationary machines, this rail gives you a controlled, repeatable cutting path right where the workpiece sits.

The big reason guys buy a rail like this is accuracy that actually saves time. Festool builds the FS 1400 around a splinter guard positioned directly at the scribe mark, so you can place the rail on your line and cut with less guessing. That matters on finished plywood, veneered panels, interior trim stock, and any job where chipped edges turn into touch-up work. The slideway lining also helps the saw or router move smoothly along the rail, which keeps the cut consistent and makes the whole setup feel more controlled.

Festool SELFCLEAN Filter Bags for CT MIDI I, 5-Pack

The Festool 204308 Self-Cleaning Filter Bags For CT 15 / CT MINI I / CT MIDI I, 5-Pack is a replacement dust extractor filter bag set for select Festool vacuums. This is a dust bag designed for collecting and containing dust and debris during cleanup, sanding, and general extraction work. Model Number 204308. If you use a Festool CT 15, CT MINI I, CT MIDI I, or compatible CTC MINI/MIDI extractor, these bags matter because they help maintain suction while making disposal cleaner and faster.

Who should buy this bundle? Cabinet installers, remodelers, flooring crews and woodworkers who break down sheet goods and want clean, accurate cuts without a cloud of dust. The CT MIDI I is the most compact and portable of the three extractor options, with a 4.0 gal container and 130 CFM of airflow, a good fit for installers who carry the extractor room to room and in and out of the van.

Festool TS 55 FEQ-F-Plus Plunge Cut Track Saw

Power Source	120 VAC corded
Power Consumption	1,200 W
No-Load Speed	2,000 - 5,800 RPM
Blade Diameter	6-5/16" (160 mm)
Max Cutting Depth	2-3/16" (55 mm)
Cutting Depth at 45 Degrees	1-11/16" (43 mm)
Bevel Range	-1 degrees to 47 degrees
Weight	10.6 lb (4.8 kg)
Dust Port Diameter	1-1/16 in / 1-7/16 in (27 / 36 mm)
Cord Length	13.1 ft (4 m)
Made In	Germany

Festool CT MIDI I HEPA Dust Extractor

Festool FS 1400/2 55-in. Guide Rail (Limited Edition Blue)

Saw, rail and extraction in one order

The Festool TS 55 FEQ-F-Plus Plunge Cut Track Saw + CT MIDI I HEPA Dust Extractor Bundle gets you a complete Festool plunge cut track saw system in one order, with the accessories you would buy next already in the box.

• Who it's for: Cabinet installers, remodelers, flooring crews and woodworkers who break down sheet goods and want clean, accurate cuts without a cloud of dust.
• Why it stands out: The TS 55 and the CT MIDI I are built to work together, and the matched 55-in. Guide Rail plus five spare filter bags mean the system is ready to work the day it arrives.
• Worth knowing: The CT MIDI I is the most compact and portable of the three extractor options, with a 4.0 gal container and 130 CFM of airflow, a good fit for installers who carry the extractor room to room and in and out of the van. The same tool is also offered with the other two extractors if you want more capacity or a smaller footprint.

• Is this a corded or cordless track saw? It is a corded 120 VAC track saw.
• What is the maximum cutting depth? Maximum cutting depth is 2-3/16" (55 mm), and depth at 45 degrees is 1-11/16" (43 mm).
• Is this a HEPA dust extractor? Yes. The CT MIDI I includes a HEPA filter and is described as a HEPA-certified dust extractor.
• Can it start automatically with a tool? Yes. It has a built-in electrical outlet for corded tool auto-start, and it also supports Bluetooth activation with compatible Festool Bluetooth battery packs or an optional remote control.
• Do the spare filter bags fit the extractor in this bundle? Yes. The 204308 SELFCLEAN filter bags are made for the Festool CT MIDI I, the extractor included in this bundle.