The Festool TS 60 KEB-F-Plus Plunge Cut Track Saw + CT 26 EI HEPA Dust Extractor Bundle pairs the Festool TS 60 KEB-F-Plus Plunge Cut Track Saw with the Festool CT 26 EI HEPA Dust Extractor, then adds the Festool FS 1400/2 55-in. Guide Rail (Limited Edition Blue) and the Festool SELFCLEAN Filter Bags for CT 26, 5-Pack. This is a plunge cut track saw and HEPA dust extraction bundle designed for straight, splinter-free cuts in sheet goods, doors and solid lumber. Model number 576726-577871-578246-496187.

Buying the pieces as one system means the setup works on day one. The extractor's anti-static suction hose connects to the TS 60's dust port, the FS 1400/2 55-in. Guide Rail (Limited Edition Blue) gives the saw a straight, splinter-free cutting reference long enough for full-width crosscuts on a 4 x 8 sheet, and the five spare SELFCLEAN bags are sized for the CT 26, so you are not shopping for consumables the first week.

Festool TS 60 KEB-F-Plus Plunge Cut Track Saw

The Festool 576726 TS 60 KEB-F-Plus Plunge Cut Track Saw Set is a corded plunge-cut track saw built for precise straight cuts, bevel cuts, and clean finish work in sheet goods, doors, flooring, and solid material up to 2-7/16 in. thick. This is a plunge-cut track saw designed for accurate ripping, cross-cutting, bevel cutting, and cutting interior components to size. Model Number: 576726.

What makes this saw matter is the mix of track-saw precision and real jobsite capacity. Festool gives you a cutting depth of 0 to 2-7/16 in. with a 6-5/8 in. blade, so you can handle thicker stock while still working in the controlled, splinter-conscious way people buy a track saw for in the first place. At 45 degrees, it still cuts up to 1-3/4 in., which is useful when you are beveling trim stock, fitting doors, or working through flooring and panel material cleanly.

The big talking point here is KickbackStop. Festool built this saw to actively help reduce kickback during sawing and plunge cutting into the workpiece. That is not just a brochure feature. On a plunge cut into a countertop, door, or finished panel, better kickback control means more confidence, less chance of marring material, and less drama when the blade first enters the cut.

Power comes from a 1,500 watt brushless EC-TEC motor with a variable no-load speed range of 3,000 to 6,800 RPM. In practical terms, that gives this circular saw enough speed for clean cuts and enough flexibility to match the blade speed to the material. Paired with Festool's thin kerf blade setup, it is designed to keep feed pressure lower while still moving through the cut efficiently. That is useful on long rips in veneered panels, hardwood flooring, and general finish carpentry where a clean edge saves cleanup later.

The saw is also built around repeatable accuracy. Bevel adjustment runs from -1 degree to 47 degrees, which gives you a little extra room on both ends for dialed-in fits. Festool also includes a transparent sliding sight window, so you can keep a better view of the blade and cut line during setup and entry. The FastFix spindle lock simplifies blade changes, which matters if you switch between fine-finish work and more general cutting during the same day.

On the jobsite side, this saw is made to work as part of a full Festool system, not as a standalone oddball. It is designed to pair with Festool guide rails and can also be combined with FSK cross-cutting guide rails to create a portable, easy-to-use cross-cutting setup for accurate angle cuts. That gives you one saw that can cover sheet breakdown, door trimming, worktop cutouts, flooring cuts, and repeat crosscuts without dragging a separate stationary saw into every space.

Dust management is built in with a dust extraction connection sized at 1-1/16 in. and 1-7/16 in. (27/36 mm), which fits the way Festool users typically run a saw: rail-guided, vacuum-connected, and working indoors or in finished spaces where dust control matters. The corded 120 VAC setup also keeps runtime out of the equation, which is a real advantage for long rip cuts and repetitive production work.

At 10.58 lbs, the TS 60 KEB-F-Plus stays manageable for a saw with this much depth capacity. It is a strong fit for cabinet installers, finish carpenters, remodelers, flooring installers, and serious woodworkers who want one premium track saw that can do more than basic panel cuts. If your work depends on accurate, clean cuts with fewer do-overs, this is the kind of saw that earns its spot fast.

See how the TS 60 compares to the rest of our Festool track saws lineup.

Festool CT 26 EI HEPA Dust Extractor

The Festool 577871 CLEANTEC CT 26 EI HEPA Dust Extractor is a professional jobsite and workshop dust extractor built for cleaner cutting, sanding, and general cleanup. This is a dust extractor designed for dry and wet extraction with tool-triggered operation. Model Number 577871. If you already run Festool saws, sanders, or cordless tools, this unit is built to act like the center of that system instead of just being a vacuum parked in the corner.

What makes the CT 26 EI matter is how it combines usable capacity with real mobility. The 6.9 gal (26 liter) container gives you nearly 7 gallons of room, but the machine still keeps compact dimensions at 25 inches long, 14 inches wide, and 22 inches high. That balance is a big deal on the job because larger extractors can be a pain to move, while smaller ones fill too quickly. Festool landed in the sweet spot here for cabinet work, remodeling, finish carpentry, and shop use.

Suction performance is strong where it counts. The high-performance turbine delivers up to 138 CFM and up to 96 inches of static water lift, which means it can keep up with dust collection at the tool while also handling cleanup duties. The five-level suction adjustment matters just as much as the max number. Being able to back the suction down helps when you are working with sanders or on surfaces where too much pull can fight the tool.

The control layout is more practical than old-school dial-and-switch setups. Festool uses push-button touch controls for straightforward operation, and the extractor supports automatic tool-triggered start for corded power tools. On the cordless side, the built-in Bluetooth interface lets the extractor start automatically with compatible Festool Bluetooth battery packs or an optional remote. That saves steps, keeps dust collection active when it should be, and makes the machine feel like part of the workflow instead of a separate task to manage.

Festool also paid attention to the stuff that usually gets ignored until it annoys you. The anti-static smooth suction hose is designed to reduce snagging and static buildup. The integrated hose holder and cord wrap keep the setup from turning into a mess in the van or at the end of the day. Large wheels make it easier to roll over thresholds and rougher surfaces, while the integrated brake helps keep the extractor from wandering when the hose gets tugged.

As a system machine, the CT 26 EI is set up to do more than collect dust. T-LOC compatibility allows Systainers to attach on top, and it also works as a base for other Festool workflow add-ons like the Pre-separator or Workcenter. That is useful if you want one mobile station carrying the extractor and the tools or accessories needed for the task. In a small shop or a punch-list van, that kind of stackable setup saves space fast.

Filtration is another reason buyers step up to this model. It includes a HEPA main filter plus a SELFCLEAN filter bag, so you are starting with a setup aimed at fine dust control rather than bare-minimum debris pickup. For trades working indoors, especially around finish work, sanding dust, or occupied spaces, that matters. Cleaner air and cleaner floors mean less time on cleanup and less dust spreading through the room you just worked in.

Who should buy it? Pros who want a serious dust extraction setup that works in the shop and on install work. It makes sense for woodworking, finish carpentry, remodeling, interior renovation, and anyone already invested in Festool tools and Systainers. If you just need a basic cleanup vacuum, this is more machine than you need. If you want a dust extractor that integrates into how you actually work, the CT 26 EI is the right kind of upgrade.

Festool FS 1400/2 55-in. Guide Rail (Limited Edition Blue)

The Festool 578246 FS 1400 Limited Edition 100th Anniversary Blue Anodized 55" Guide Rail is a precision guide rail for track saw, router, and jigsaw work. This is a guide rail designed for straight, splinter-free cuts and routing grooves. Model Number 578246. If you want cleaner results without dragging big sheet goods across stationary machines, this rail gives you a controlled, repeatable cutting path right where the workpiece sits.

The big reason guys buy a rail like this is accuracy that actually saves time. Festool builds the FS 1400 around a splinter guard positioned directly at the scribe mark, so you can place the rail on your line and cut with less guessing. That matters on finished plywood, veneered panels, interior trim stock, and any job where chipped edges turn into touch-up work. The slideway lining also helps the saw or router move smoothly along the rail, which keeps the cut consistent and makes the whole setup feel more controlled.

Festool SELFCLEAN Filter Bags for CT 26, 5-Pack

The Festool SC FIS-CT 26/5 SELFCLEAN Filter Bag is a replacement filter bag pack for Festool CT 26 dust extractors. This is a dust extractor filter bag designed for collecting fine dust and debris while helping the vacuum maintain strong airflow. Model Number 496187. If you run a CT 26 in the shop or on site, this is the bag setup that makes the extractor work the way it is supposed to.

Who should buy this bundle? Cabinet installers, remodelers, flooring crews and woodworkers who break down sheet goods and want clean, accurate cuts without a cloud of dust. The CT 26 EI is the middle option, with a 6.9 gal (26 L) container and 138 CFM of airflow, balancing capacity and mobility for shop and jobsite work.

Festool TS 60 KEB-F-Plus Plunge Cut Track Saw

Festool CT 26 EI HEPA Dust Extractor

Festool FS 1400/2 55-in. Guide Rail (Limited Edition Blue)

Saw, rail and extraction in one order

The Festool TS 60 KEB-F-Plus Plunge Cut Track Saw + CT 26 EI HEPA Dust Extractor Bundle gets you a complete Festool plunge cut track saw system in one order, with the accessories you would buy next already in the box.

• Who it's for: Cabinet installers, remodelers, flooring crews and woodworkers who break down sheet goods and want clean, accurate cuts without a cloud of dust.
• Why it stands out: The TS 60 and the CT 26 are built to work together, and the matched 55-in. Guide Rail plus five spare filter bags mean the system is ready to work the day it arrives.
• Worth knowing: The CT 26 EI is the middle option, with a 6.9 gal (26 L) container and 138 CFM of airflow, balancing capacity and mobility for shop and jobsite work. The same tool is also offered with the other two extractors if you want more capacity or a smaller footprint.

• What type of saw is this? It is a corded plunge-cut track saw designed for guided straight cuts, bevel cuts, and precision work in wood-based sheet goods, doors, flooring, and similar materials.
• What is the maximum cutting depth? Maximum cutting depth is 2-7/16" (62 mm), and maximum cutting depth at 45 degrees is 1-3/4" (45 mm).
• Can this extractor handle wet and dry pickup? Yes. Festool lists the CT 26 EI HEPA as ideal for dry and wet extraction.
• Does it support automatic start with tools? Yes. It is designed for automatic tool-triggered operation with corded power tools, and the built-in Bluetooth also supports automatic start from compatible Festool cordless tools or an optional remote.
• Do the spare filter bags fit the extractor in this bundle? Yes. The 496187 SELFCLEAN filter bags are made for the Festool CT 26, the extractor included in this bundle.