The Festool TS 60 KEB-F-Plus Plunge Cut Track Saw + CT 36 EI HEPA Dust Extractor Bundle pairs the Festool TS 60 KEB-F-Plus Plunge Cut Track Saw with the Festool CT 36 EI HEPA Dust Extractor, then adds the Festool FS 1400/2 55-in. Guide Rail (Limited Edition Blue) and the Festool SELFCLEAN Filter Bags for CT 36, 5-Pack. This is a plunge cut track saw and HEPA dust extraction bundle designed for straight, splinter-free cuts in sheet goods, doors and solid lumber. Model number 576726-577872-578246-496186.

Buying the pieces as one system means the setup works on day one. The extractor's anti-static suction hose connects to the TS 60's dust port, the FS 1400/2 55-in. Guide Rail (Limited Edition Blue) gives the saw a straight, splinter-free cutting reference long enough for full-width crosscuts on a 4 x 8 sheet, and the five spare SELFCLEAN bags are sized for the CT 36, so you are not shopping for consumables the first week.

Festool TS 60 KEB-F-Plus Plunge Cut Track Saw

The Festool 576726 TS 60 KEB-F-Plus Plunge Cut Track Saw Set is a corded plunge-cut track saw built for precise straight cuts, bevel cuts, and clean finish work in sheet goods, doors, flooring, and solid material up to 2-7/16 in. thick. This is a plunge-cut track saw designed for accurate ripping, cross-cutting, bevel cutting, and cutting interior components to size. Model Number: 576726.

What makes this saw matter is the mix of track-saw precision and real jobsite capacity. Festool gives you a cutting depth of 0 to 2-7/16 in. with a 6-5/8 in. blade, so you can handle thicker stock while still working in the controlled, splinter-conscious way people buy a track saw for in the first place. At 45 degrees, it still cuts up to 1-3/4 in., which is useful when you are beveling trim stock, fitting doors, or working through flooring and panel material cleanly.

The big talking point here is KickbackStop. Festool built this saw to actively help reduce kickback during sawing and plunge cutting into the workpiece. That is not just a brochure feature. On a plunge cut into a countertop, door, or finished panel, better kickback control means more confidence, less chance of marring material, and less drama when the blade first enters the cut.

Power comes from a 1,500 watt brushless EC-TEC motor with a variable no-load speed range of 3,000 to 6,800 RPM. In practical terms, that gives this circular saw enough speed for clean cuts and enough flexibility to match the blade speed to the material. Paired with Festool's thin kerf blade setup, it is designed to keep feed pressure lower while still moving through the cut efficiently. That is useful on long rips in veneered panels, hardwood flooring, and general finish carpentry where a clean edge saves cleanup later.

The saw is also built around repeatable accuracy. Bevel adjustment runs from -1 degree to 47 degrees, which gives you a little extra room on both ends for dialed-in fits. Festool also includes a transparent sliding sight window, so you can keep a better view of the blade and cut line during setup and entry. The FastFix spindle lock simplifies blade changes, which matters if you switch between fine-finish work and more general cutting during the same day.

On the jobsite side, this saw is made to work as part of a full Festool system, not as a standalone oddball. It is designed to pair with Festool guide rails and can also be combined with FSK cross-cutting guide rails to create a portable, easy-to-use cross-cutting setup for accurate angle cuts. That gives you one saw that can cover sheet breakdown, door trimming, worktop cutouts, flooring cuts, and repeat crosscuts without dragging a separate stationary saw into every space.

Dust management is built in with a dust extraction connection sized at 1-1/16 in. and 1-7/16 in. (27/36 mm), which fits the way Festool users typically run a saw: rail-guided, vacuum-connected, and working indoors or in finished spaces where dust control matters. The corded 120 VAC setup also keeps runtime out of the equation, which is a real advantage for long rip cuts and repetitive production work.

At 10.58 lbs, the TS 60 KEB-F-Plus stays manageable for a saw with this much depth capacity. It is a strong fit for cabinet installers, finish carpenters, remodelers, flooring installers, and serious woodworkers who want one premium track saw that can do more than basic panel cuts. If your work depends on accurate, clean cuts with fewer do-overs, this is the kind of saw that earns its spot fast.

See how the TS 60 compares to the rest of our Festool track saws lineup.

Festool CT 36 EI HEPA Dust Extractor

The Festool 577872 CLEANTEC CT 36 EI HEPA Dust Extractor is a professional dust extractor built for workshop dust collection and jobsite cleanup. This is a dust extractor designed for dry and wet extraction, tool-triggered dust collection, and cleaner work around corded and compatible cordless tools. Model Number 577872. If you need one extractor that can handle daily sanding, cutting, drilling, and general cleanup without constantly stopping to empty it, this is the one Festool built to sit right in the middle of your system.

The big selling point here is capacity without the usual penalty in size. Festool gives you a 36-liter container, or nearly 9.5 gallons, while keeping the machine compact enough to move through a shop or around a remodel. That matters when you are collecting dust all day from sanders, track saws, routers, or cleanup work and do not want a small extractor filling up every couple of hours. With up to 138 CFM of airflow and a maximum vacuum rating of 96 inches of static water lift, it has the pull needed for serious dust collection, not just light bench cleanup.

Festool also got the controls right. The touch-style push-button interface is simple to use, and you get five suction levels instead of one fixed setting. That means you can back suction down when a sander wants controlled airflow, or turn it up when you are collecting heavier debris. Tool-triggered operation for corded tools keeps the extractor and tool working together automatically, which is a real time-saver when you are bouncing from cut to cut or moving through repetitive sanding work.

Where this model separates itself from a basic shop vacuum is system integration. The built-in Bluetooth interface lets the extractor start automatically with compatible Festool Bluetooth battery packs or an optional remote control. You can also connect it to the Festool app for support and warning notifications. On the job, that means less walking over to the extractor and less breaking your rhythm. If you already run Festool cordless tools or want cleaner remote startup control, this is a meaningful upgrade over a standard corded extractor.

The physical design is clearly aimed at daily use. The smooth anti-static suction hose is built to reduce snagging, which matters more than it sounds when you are moving around a bench, assembly table, or finished interior. Festool includes integrated hose storage and cord wrap so the setup stays organized instead of turning into a pile of hose and cable at the end of the day. Large wheels make it easier to roll, while the integrated brake keeps it planted once you have it where you want it.

It is also built to function as a hub, not just a vacuum. T-LOC compatibility lets you dock Systainers on top, and Festool also calls out compatibility with the Pre-separator and Workcenter. That gives you one rolling station for extraction, storage, and workflow organization. In a shop, that keeps sanding and cutting accessories together. On a remodel or install job, it cuts down on trips back to the van and helps keep the work area tighter and cleaner.

The included HEPA main filter is a big part of why this extractor matters to pros working indoors, in occupied homes, or anywhere dust control is not optional. Festool rates it for both dry and wet extraction, which adds flexibility when cleanup conditions change during the day. The anti-static setup also helps reduce nuisance static buildup during operation, which makes the overall system feel more refined than a generic jobsite vacuum.

Who should buy it? This extractor makes the most sense for woodworkers, remodelers, finish carpenters, installers, and serious DIY users who already care about cleaner cuts, better sanding results, and less post-job cleanup. If you want the cheapest vacuum possible, this is not that tool. If you want a dust extractor that works like part of a complete Festool workflow and earns its keep every day, the CT 36 EI HEPA is the kind of machine you buy once and use for years.

Festool FS 1400/2 55-in. Guide Rail (Limited Edition Blue)

The Festool 578246 FS 1400 Limited Edition 100th Anniversary Blue Anodized 55" Guide Rail is a precision guide rail for track saw, router, and jigsaw work. This is a guide rail designed for straight, splinter-free cuts and routing grooves. Model Number 578246. If you want cleaner results without dragging big sheet goods across stationary machines, this rail gives you a controlled, repeatable cutting path right where the workpiece sits.

The big reason guys buy a rail like this is accuracy that actually saves time. Festool builds the FS 1400 around a splinter guard positioned directly at the scribe mark, so you can place the rail on your line and cut with less guessing. That matters on finished plywood, veneered panels, interior trim stock, and any job where chipped edges turn into touch-up work. The slideway lining also helps the saw or router move smoothly along the rail, which keeps the cut consistent and makes the whole setup feel more controlled.

Festool SELFCLEAN Filter Bags for CT 36, 5-Pack

The Festool 496186 SELFCLEAN Filter Bag for CT 36 is a replacement dust extractor bag made for Festool CT 36 units. This is a dust extractor filter bag designed for collecting fine dust and debris while maintaining consistent suction. Model Number: 496186. If you run a CT 36 on sanding, cutting, or general cleanup, this bag matters because it helps the extractor keep working efficiently instead of fading off as the bag fills.

Who should buy this bundle? Cabinet installers, remodelers, flooring crews and woodworkers who break down sheet goods and want clean, accurate cuts without a cloud of dust. The CT 36 EI has the largest container of the three, 9.5 gal (36 L), with 138 CFM of airflow for high-volume sanding, sheet goods breakdown and fewer bag changes.

Festool TS 60 KEB-F-Plus Plunge Cut Track Saw

Festool CT 36 EI HEPA Dust Extractor

Festool FS 1400/2 55-in. Guide Rail (Limited Edition Blue)

Saw, rail and extraction in one order

The Festool TS 60 KEB-F-Plus Plunge Cut Track Saw + CT 36 EI HEPA Dust Extractor Bundle gets you a complete Festool plunge cut track saw system in one order, with the accessories you would buy next already in the box.

• Who it's for: Cabinet installers, remodelers, flooring crews and woodworkers who break down sheet goods and want clean, accurate cuts without a cloud of dust.
• Why it stands out: The TS 60 and the CT 36 are built to work together, and the matched 55-in. Guide Rail plus five spare filter bags mean the system is ready to work the day it arrives.
• Worth knowing: The CT 36 EI has the largest container of the three, 9.5 gal (36 L), with 138 CFM of airflow for high-volume sanding, sheet goods breakdown and fewer bag changes. The same tool is also offered with the other two extractors if you want more capacity or a smaller footprint.

• What type of saw is this? It is a corded plunge-cut track saw designed for guided straight cuts, bevel cuts, and precision work in wood-based sheet goods, doors, flooring, and similar materials.
• What is the maximum cutting depth? Maximum cutting depth is 2-7/16" (62 mm), and maximum cutting depth at 45 degrees is 1-3/4" (45 mm).
• Is this dust extractor rated for wet and dry use? Yes. Festool lists the CT 36 EI HEPA as ideal for both dry and wet extraction.
• Does it support automatic startup with tools? Yes. It supports tool-triggered operation for corded power tools and also has built-in Bluetooth for compatible Festool cordless tools or an optional remote control.
• Do the spare filter bags fit the extractor in this bundle? Yes. The 496186 SELFCLEAN filter bags are made for the Festool CT 36, the extractor included in this bundle.