The Festool TS 60 KEB-F-Plus Plunge Cut Track Saw + CT MIDI I HEPA Dust Extractor Bundle pairs the Festool TS 60 KEB-F-Plus Plunge Cut Track Saw with the Festool CT MIDI I HEPA Dust Extractor, then adds the Festool FS 1400/2 55-in. Guide Rail (Limited Edition Blue) and the Festool SELFCLEAN Filter Bags for CT MIDI I, 5-Pack. This is a plunge cut track saw and HEPA dust extraction bundle designed for straight, splinter-free cuts in sheet goods, doors and solid lumber. Model number 576726-578512-578246-204308.

Buying the pieces as one system means the setup works on day one. The extractor's anti-static suction hose connects to the TS 60's dust port, the FS 1400/2 55-in. Guide Rail (Limited Edition Blue) gives the saw a straight, splinter-free cutting reference long enough for full-width crosscuts on a 4 x 8 sheet, and the five spare SELFCLEAN bags are sized for the CT MIDI I, so you are not shopping for consumables the first week.

Festool TS 60 KEB-F-Plus Plunge Cut Track Saw

The Festool 576726 TS 60 KEB-F-Plus Plunge Cut Track Saw Set is a corded plunge-cut track saw built for precise straight cuts, bevel cuts, and clean finish work in sheet goods, doors, flooring, and solid material up to 2-7/16 in. thick. This is a plunge-cut track saw designed for accurate ripping, cross-cutting, bevel cutting, and cutting interior components to size. Model Number: 576726.

What makes this saw matter is the mix of track-saw precision and real jobsite capacity. Festool gives you a cutting depth of 0 to 2-7/16 in. with a 6-5/8 in. blade, so you can handle thicker stock while still working in the controlled, splinter-conscious way people buy a track saw for in the first place. At 45 degrees, it still cuts up to 1-3/4 in., which is useful when you are beveling trim stock, fitting doors, or working through flooring and panel material cleanly.

The big talking point here is KickbackStop. Festool built this saw to actively help reduce kickback during sawing and plunge cutting into the workpiece. That is not just a brochure feature. On a plunge cut into a countertop, door, or finished panel, better kickback control means more confidence, less chance of marring material, and less drama when the blade first enters the cut.

Power comes from a 1,500 watt brushless EC-TEC motor with a variable no-load speed range of 3,000 to 6,800 RPM. In practical terms, that gives this circular saw enough speed for clean cuts and enough flexibility to match the blade speed to the material. Paired with Festool's thin kerf blade setup, it is designed to keep feed pressure lower while still moving through the cut efficiently. That is useful on long rips in veneered panels, hardwood flooring, and general finish carpentry where a clean edge saves cleanup later.

The saw is also built around repeatable accuracy. Bevel adjustment runs from -1 degree to 47 degrees, which gives you a little extra room on both ends for dialed-in fits. Festool also includes a transparent sliding sight window, so you can keep a better view of the blade and cut line during setup and entry. The FastFix spindle lock simplifies blade changes, which matters if you switch between fine-finish work and more general cutting during the same day.

On the jobsite side, this saw is made to work as part of a full Festool system, not as a standalone oddball. It is designed to pair with Festool guide rails and can also be combined with FSK cross-cutting guide rails to create a portable, easy-to-use cross-cutting setup for accurate angle cuts. That gives you one saw that can cover sheet breakdown, door trimming, worktop cutouts, flooring cuts, and repeat crosscuts without dragging a separate stationary saw into every space.

Dust management is built in with a dust extraction connection sized at 1-1/16 in. and 1-7/16 in. (27/36 mm), which fits the way Festool users typically run a saw: rail-guided, vacuum-connected, and working indoors or in finished spaces where dust control matters. The corded 120 VAC setup also keeps runtime out of the equation, which is a real advantage for long rip cuts and repetitive production work.

At 10.58 lbs, the TS 60 KEB-F-Plus stays manageable for a saw with this much depth capacity. It is a strong fit for cabinet installers, finish carpenters, remodelers, flooring installers, and serious woodworkers who want one premium track saw that can do more than basic panel cuts. If your work depends on accurate, clean cuts with fewer do-overs, this is the kind of saw that earns its spot fast.

See how the TS 60 compares to the rest of our Festool track saws lineup.

Festool CT MIDI I HEPA Dust Extractor

Festool 578512 CT MIDI I HEPA Bluetooth Dust Extractor is a compact mobile dust extractor built for contractors, installers, finish carpenters, and serious DIY users who need clean work with less hassle. This is a dust extractor designed for on-site dust collection, cleanup, and tool-connected extraction during sanding, routing, sawing, and drilling. Model Number: 578512. If you want a unit that is easy to move but still has the suction and control features that matter on real jobs, this is the lane the CT MIDI I is built for.

The big reason this extractor stands out is how much performance Festool fits into a small platform. With up to 130 CFM of airflow and a maximum vacuum rating of 96 in static water lift, it is built to keep up with common power tool dust collection tasks and final cleanup without feeling underpowered. The suction is adjustable in five levels, which matters when you are switching between tasks like sanding a painted door, trimming material indoors, or drilling where too much suction can fight the tool.

Festool also got the day-to-day usability right here. The touch controls are simple and easy to use, even when you are wearing gloves or working in dusty conditions. The smooth tapered suction hose is designed to reduce snagging, which is a small detail until you are dragging a hose around finished flooring, around sawhorses, or along a guide rail all day. The flat top gives you a usable storage surface, and the integrated hose garage and cord wrap keep the setup from turning into a pile of hose and cable in the van.

Filter access is another practical improvement. The main filter can be replaced from the outside, and the manual filter cleaning function helps restore airflow when the filter or bag starts to load up. In plain terms, that means you can keep suction where it needs to be and use more of the bag capacity before stopping. For anyone doing repeated sanding or punch-list work inside occupied spaces, that is a real time-saver.

Dust control is only half the story. The CT MIDI I HEPA is also set up to work smarter with your tools. The built-in electrical outlet supports tool-triggered auto-on operation for corded tools, so the extractor starts with the tool instead of forcing you to make a second trip. Integrated Bluetooth expands that to certain cordless setups when used with Bluetooth battery packs or an optional remote control. That makes this extractor a better fit for mixed corded and cordless workflows than a basic shop vacuum.

On portability, this unit lands in a very useful middle ground. It is lighter and easier to carry than a larger extractor, but it still gives you a 4.0 gallon container capacity and 3.3 gallon filter bag capacity. The chassis is built for jobsite movement, with large rear wheels, front casters, and a locking brake to keep it planted once you have it where you need it. Festool also integrates the extractor with its Systainer system through the T-LOC connection, which matters if your workflow already revolves around stacked tool storage and mobile setups.

The wet extraction capability adds flexibility, but there is an important detail: wet extraction requires a special wet filter. The built-in LevelStop system shuts the motor down when collecting water to help protect the machine. That makes this more versatile than a dust-only extractor, but it is still clearly optimized for clean, mobile dust extraction around power tools first.

Who should buy it? If you work inside finished spaces, do installation work, punch-list work, cabinet fitting, trim, door prep, flooring, or light remodeling, this Festool dust extractor makes a lot of sense. It is especially good for users who care about mobility, cleaner indoor work, and better integration with cordless and corded tools. If you need maximum debris capacity for heavy demolition, you would step up in size. If you want a compact extractor that travels well and does the job right, this one is right in the sweet spot.

Festool FS 1400/2 55-in. Guide Rail (Limited Edition Blue)

The Festool 578246 FS 1400 Limited Edition 100th Anniversary Blue Anodized 55" Guide Rail is a precision guide rail for track saw, router, and jigsaw work. This is a guide rail designed for straight, splinter-free cuts and routing grooves. Model Number 578246. If you want cleaner results without dragging big sheet goods across stationary machines, this rail gives you a controlled, repeatable cutting path right where the workpiece sits.

The big reason guys buy a rail like this is accuracy that actually saves time. Festool builds the FS 1400 around a splinter guard positioned directly at the scribe mark, so you can place the rail on your line and cut with less guessing. That matters on finished plywood, veneered panels, interior trim stock, and any job where chipped edges turn into touch-up work. The slideway lining also helps the saw or router move smoothly along the rail, which keeps the cut consistent and makes the whole setup feel more controlled.

Festool SELFCLEAN Filter Bags for CT MIDI I, 5-Pack

The Festool 204308 Self-Cleaning Filter Bags For CT 15 / CT MINI I / CT MIDI I, 5-Pack is a replacement dust extractor filter bag set for select Festool vacuums. This is a dust bag designed for collecting and containing dust and debris during cleanup, sanding, and general extraction work. Model Number 204308. If you use a Festool CT 15, CT MINI I, CT MIDI I, or compatible CTC MINI/MIDI extractor, these bags matter because they help maintain suction while making disposal cleaner and faster.

Who should buy this bundle? Cabinet installers, remodelers, flooring crews and woodworkers who break down sheet goods and want clean, accurate cuts without a cloud of dust. The CT MIDI I is the most compact and portable of the three extractor options, with a 4.0 gal container and 130 CFM of airflow, a good fit for installers who carry the extractor room to room and in and out of the van.

Festool TS 60 KEB-F-Plus Plunge Cut Track Saw

Festool CT MIDI I HEPA Dust Extractor

Festool FS 1400/2 55-in. Guide Rail (Limited Edition Blue)

Saw, rail and extraction in one order

The Festool TS 60 KEB-F-Plus Plunge Cut Track Saw + CT MIDI I HEPA Dust Extractor Bundle gets you a complete Festool plunge cut track saw system in one order, with the accessories you would buy next already in the box.

• Who it's for: Cabinet installers, remodelers, flooring crews and woodworkers who break down sheet goods and want clean, accurate cuts without a cloud of dust.
• Why it stands out: The TS 60 and the CT MIDI I are built to work together, and the matched 55-in. Guide Rail plus five spare filter bags mean the system is ready to work the day it arrives.
• Worth knowing: The CT MIDI I is the most compact and portable of the three extractor options, with a 4.0 gal container and 130 CFM of airflow, a good fit for installers who carry the extractor room to room and in and out of the van. The same tool is also offered with the other two extractors if you want more capacity or a smaller footprint.

• What type of saw is this? It is a corded plunge-cut track saw designed for guided straight cuts, bevel cuts, and precision work in wood-based sheet goods, doors, flooring, and similar materials.
• What is the maximum cutting depth? Maximum cutting depth is 2-7/16" (62 mm), and maximum cutting depth at 45 degrees is 1-3/4" (45 mm).
• Is this a HEPA dust extractor? Yes. The CT MIDI I includes a HEPA filter and is described as a HEPA-certified dust extractor.
• Can it start automatically with a tool? Yes. It has a built-in electrical outlet for corded tool auto-start, and it also supports Bluetooth activation with compatible Festool Bluetooth battery packs or an optional remote control.
• Do the spare filter bags fit the extractor in this bundle? Yes. The 204308 SELFCLEAN filter bags are made for the Festool CT MIDI I, the extractor included in this bundle.