Milwaukee 3497-22 M12 FUEL 1/2-in. Drill Driver and 1/4-in. Hex Impact Driver with ROVER 700-Lumen Flood Light 2.0Ah / 4.0Ah Combo Kit
Milwaukee 3497-22 M12 FUEL 1/2-in. Drill Driver and 1/4-in. Hex Impact Driver with ROVER 700-Lumen Flood Light 2.0Ah / 4.0Ah Combo Kit
In Stock - Ready to Ship
Product Details
Product Details
Key Features
Overview
The Milwaukee 3497-22 M12 FUEL 1/2-in. Drill Driver and 1/4-in. Hex Impact Driver with ROVER 700-Lumen Flood Light 2.0Ah / 4.0Ah Combo Kit is a compact cordless drilling, fastening, and lighting package for service techs, installers, and remodelers. This is a drill and impact driver combo kit designed for drilling, hammer drilling, and driving fasteners in tight spaces, bundled with a cordless work light for the dark places those jobs usually happen. Model Number 3497-22-PROMO 2367-20 combines the Milwaukee 3497-22 M12 FUEL 2-Tool Combo Kit with the Milwaukee 2367-20 M12 ROVER flood light.
The drill in the 3497-22 kit is the M12 FUEL 1/2" hammer drill/driver. Its POWERSTATE brushless motor delivers 400 in-lbs of torque, and hammer mode lets you set anchors and drill small holes in brick and block without swapping tools. The 1/2" all-metal chuck grips bits harder and outlasts plastic-sleeve chucks, the all-metal gearcase protects the drivetrain, and the mechanical clutch keeps screw driving consistent across a wide range of fasteners. At 6" long and 2.6 lbs, it is light enough to ride on a tool belt all day.
The M12 FUEL 1/4" hex impact driver handles the fastening. Milwaukee rates it at up to 1,500 in-lbs of torque and up to 3,600 RPM, and 4-mode drive control includes a dedicated self-tapping screw mode that helps keep you from stripping heads or snapping screws in sheet metal. It measures 5" long and 7.6" tall with the compact battery installed. Three LEDs ring the collet to light the fastener without the shadow a single foot light throws. If you are building out a Milwaukee impact driver collection for different jobs, this one is the compact, high-output end of the M12 range.
Both tools use REDLINK PLUS intelligence to manage heat and load, which is what keeps a 12V tool working through back-to-back holes and long screw runs instead of shutting down early. The kit includes two batteries: an M12 REDLITHIUM XC 4.0Ah for longer runtime and an M12 REDLITHIUM CP 2.0Ah when weight and size matter more than runtime. The 3497-22 kit also includes the M12 charger and a contractor bag.
The M12 ROVER Service and Repair Flood Light is what turns this from a standard combo kit into a service-call kit. It puts out 700 lumens of TRUEVIEW high definition light, runs up to 24 hours on an XC 4.0Ah battery, and the light head pivots 120 degrees. A rear-facing magnet sticks it to car hoods, breaker panels, steel studs, and ductwork, and an integrated keyhole hangs it where there is no steel. The overmolded base doubles as a handheld inspection light. A built-in 2.1 amp USB port charges your phone from the same M12 battery. Milwaukee rates the ROVER IP54 for dust and water resistance with a 9 ft drop rating. The light ships as a bare tool, but the kit batteries power it.
Everything here runs on the Milwaukee M12 platform, which Milwaukee lists at over 125 tools. If you already own M12 batteries, every one of them works with all three tools. If you do not, this kit gives you two batteries and a charger to start the system.
Who should buy it? Electricians working in panels and boxes, HVAC and plumbing service techs, cabinet and fixture installers, maintenance crews, and remodelers who spend more time in tight, poorly lit spaces than on open framing. Serious DIYers who want compact tools that do not feel like toys will get the same benefit. If most of your work is large-diameter holes in framing all day, step up to an M18 hammer drill. For everything else this kit covers, the size is the advantage.
Drill, Drive, and Hammer in One Small Package
The 1/2" hammer drill/driver covers wood, metal, and light masonry work, while the impact driver takes the fastening load off the drill. Splitting the work between two tools means fewer bit swaps and less time switching chucks back and forth.
- 400 in-lbs of torque from the hammer drill/driver with a 1/2" all-metal chuck
- Up to 1,500 in-lbs and 3,600 RPM from the 1/4" hex impact driver
- 4-mode drive control with a dedicated self-tapping screw mode
Light the Job, Then Charge Your Phone
The ROVER flood light goes where the work is: stuck to a panel door, hung from a keyhole, or held in your hand. On a long service call, its USB port keeps your phone alive from the same battery that runs your drill.
- 700 lumens of TRUEVIEW high definition output
- Up to 24 hours of runtime on the included XC 4.0Ah battery
- IP54 dust and water resistance with a 9 ft drop rating
What's in the Box
- (1) M12 FUEL 1/2" Hammer Drill/Driver (3404-20)
- (1) M12 FUEL 1/4" Hex Impact Driver (3453-20)
- (1) M12 ROVER Service and Repair Flood Light with USB Charging (2367-20)
- (1) M12 REDLITHIUM XC 4.0Ah Battery Pack (48-11-2440)
- (1) M12 REDLITHIUM CP 2.0Ah Battery Pack (48-11-2420)
- (1) M12 Lithium-Ion Battery Charger (48-59-2401)
- (1) Contractor Bag
At a Glance
Key Specifications
|
|
12 V |
|---|---|
|
|
Milwaukee M12 |
|
|
POWERSTATE brushless (drill and impact driver) |
|
|
1/2" all-metal |
|
|
400 in-lbs |
|
|
6" |
|
|
1/4" hex |
|
|
Up to 1,500 in-lbs |
|
|
Up to 3,600 RPM |
|
|
4 (including self-tapping screw mode) |
|
|
5" long, 7.6" tall with CP 2.0Ah battery |
|
|
700 lumens |
|
|
Up to 24 hours with XC 4.0Ah battery |
|
|
120 degrees |
|
|
2.1 A |
|
|
IP54 |
|
|
(1) XC 4.0Ah, (1) CP 2.0Ah |
Compatibility
Built For
Pro Tip
Put the XC 4.0Ah battery in the ROVER light when you set up, since it pulls a steady load for hours, and keep the CP 2.0Ah on whichever tool you are holding overhead. Swap them at lunch and both stay topped off without a trip to the truck.
Warranty & Support
Tool Nut's Take
The Milwaukee 3497-22 M12 FUEL Combo Kit with ROVER Flood Light Is a Service Truck in a Bag
The light is the piece most people forget to buy until they are on their back under a sink, and this bundle puts it in the bag from day one.
- Who it's for: Electricians, HVAC and plumbing techs, installers, and maintenance crews who work in cramped, dark spaces and want one battery system for drilling, driving, and lighting.
- Why it stands out: M12 FUEL brushless performance in two genuinely compact tools, plus a magnetic 700-lumen light with USB charging, all powered by the two included batteries.
- Worth knowing: Milwaukee names the 3497-22 a drill driver kit, but the drill inside is the 1/2" hammer drill/driver. Hammer mode handles anchors and light masonry, not production concrete drilling.
Common Questions
- Does the flood light come with its own battery? No. The ROVER light is a bare tool, but it runs on either of the two M12 batteries included with the 3497-22 kit.
- Does the drill have a hammer mode? Yes. The kit includes the M12 FUEL 1/2" hammer drill/driver.
- How long does the light run? Milwaukee rates it at up to 24 hours on an M12 XC 4.0Ah battery.
- Will my other M12 batteries work? Yes. All three tools accept any M12 REDLITHIUM battery.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

