Stanley Bostitch 2-1/2-in. Coil Siding Nailer (N66C-1)
Stanley Bostitch 2-1/2-in. Coil Siding Nailer (N66C-1)
In Stock - Ready to Ship
Product Details
Product Details
Key Features
Overview
Bostitch N66C-1 2-1/2 in. Coil Siding Nailer is a pneumatic siding nailer built for installing siding, shingles, sheathing, insulation board, drywall, and fiber-cement boards with coil nails. This is a coil siding nailer designed for fastening exterior materials quickly with consistent depth and high magazine capacity. Model Number: N66C-1. If you want a dedicated air nailer for siding work instead of forcing a roofing nailer or framing nailer to do a job it was not built for, this is the right type of tool.
The big advantage here is nail compatibility and capacity. The tool drives 15-degree wire-weld and plastic inserted coil nails from 1-1/4 in. to 2-1/2 in., with a magazine capacity of up to 300 nails. On the job, that means fewer reloads and better pace when you're running long walls or repetitive fastening work. It also handles nail diameters from 0.080 in. to 0.092 in., which is the range contractors expect for many siding and sheathing applications.
The adjustable depth guide is one of the features that actually saves time. Instead of stopping to correct overdriven fasteners or leaving heads standing proud, you can tune the setting to match the material. That matters on softer woods, shingles, and fiber cement, where clean fastening affects both appearance and holding power. Bostitch also adds a soft rubber foot to help reduce marring on softer materials, which is a practical detail if you're working on visible finished surfaces.
From a build standpoint, the aluminum housing keeps weight down without turning the tool into a disposable jobsite piece. The listed net tool weight is 4.7 lbs, and that lighter feel matters more than people think when you're moving ladder to ladder or reaching across a wall. A siding nailer does not sound heavy on paper, but after a full day of repetitive use, lighter tools are the ones you still want in your hand.
Air tools live or die by jobsite usability, and this one is set up the way it should be. It runs on 70 to 120 PSI, so it fits easily into the normal range for common compressors used by siding crews and remodelers. The tool-free adjustable exhaust lets you direct air away from your face and away from the work area, which is a small feature until you've used a nailer that constantly blows debris where you do not want it.
The Bostitch N66C-1 2-1/2 in. Coil Siding Nailer is best for siding installers, remodelers, general contractors, and serious DIY users who want a purpose-built pneumatic nailer for exterior fastening. If most of your work is lap siding, cedar shingles, wall sheathing, or fiber cement installation, this tool makes sense. If you only need to shoot a few nails once a year, it is more tool than you need. But if siding work is on your schedule regularly, the fast reloads, depth adjustment, and lighter body are exactly what you pay for.
Fast Reloads for Repetitive Siding Work

The coil magazine is the real productivity play here. With room for up to 300 nails, you spend more time fastening and less time stopping to reload during long siding runs.
- 300-nail magazine capacity supports repetitive fastening work
- Designed for 15-degree wire-weld and plastic inserted coil nails
Set Depth Without Slowing Down

Different materials do not all take fasteners the same way. The adjustable depth guide helps you match nail set to the material so you get cleaner results on softer woods, shingles, and fiber cement.
- Adjustable depth guide for faster setup changes
- Soft rubber foot helps protect softer wood surfaces
What's in the Box
- (1) Bostitch N66C-1 Coil Siding Nailer
- (1) Sequential Trip
Nails are not included.
Key Specifications
| Power Source | Pneumatic |
|---|---|
| Fastener Type | 15-degree wire-weld and plastic inserted coil nails |
| Fastener Length Range | 1-1/4 in. to 2-1/2 in. |
| Fastener Diameter Range | 0.080 in. to 0.092 in. |
| Magazine Capacity | 300 nails |
| Operating Pressure | 70 to 120 PSI |
| Net Tool Weight | 4.7 lbs |
| Collation Angle | 15 degrees |
Compatibility
Built For
Pro Tip
When you switch between softer wood siding and fiber cement, take a minute to reset the depth guide before you start the next section. It is faster than fixing overdriven nails later, and it helps the rubber foot do its job on visible material.
Warranty & Support
Tool Nut's Take
Bostitch N66C-1 2-1/2 in. Coil Siding Nailer Gets the Siding Job Done Without Extra Bulk
This is the kind of pneumatic siding nailer that makes sense for real exterior work because it stays light, holds a full coil, and gives you the depth control you actually need.
- Who it's for: Siding crews, remodelers, and contractors fastening lap siding, shingles, sheathing, and fiber cement on a regular basis.
- Why it stands out: The light aluminum body, 300-nail capacity, and broad 1-1/4 in. to 2-1/2 in. fastener range make it more jobsite-friendly than heavier specialty nailers.
- Worth knowing: This is an air tool, so you need a compressor setup, and it ships without nails. If you already run pneumatic tools, that is not a downside. It is just the deal.
Common Questions
- What type of nails does this nailer use? It is designed for 15-degree wire-weld and plastic inserted coil nails.
- What nail lengths can it drive? It accepts fasteners from 1-1/4 in. up to 2-1/2 in. long.
- What air pressure does it need? The operating pressure range is 70 to 120 PSI.
- Is this a cordless siding nailer? No. The Bostitch N66C-1 2-1/2 in. Coil Siding Nailer is a pneumatic tool.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


