The Milwaukee 1-1/8 In. SDS Plus Rotary Hammer Kit, Model 5268-21, is a corded rotary hammer built for drilling and light demolition in concrete, masonry, and similar jobsite materials. This is a rotary hammer designed for concrete drilling, anchor setting, and chiseling. If you need a tool that hits harder than a standard hammer drill without moving up to a much larger platform, this one lands in a useful middle ground.

Milwaukee gives this unit an 8-amp motor that produces 0-1,500 RPM, 0-5,500 BPM, and 3.6 ft-lbs of impact energy. On the job, that means faster hole drilling in concrete and enough striking force for chipping and corrective work when you switch to hammer-only mode. The 1-1/8 inch class also makes sense for trades that need real rotary hammer performance but still want a tool that is manageable for overhead work and repeated repositioning.

One of the more practical parts of this tool is the 3-mode setup: rotary hammer, hammer only, and rotation only. That gives you flexibility for drilling masonry, doing light chipping, or using the tool in straight rotation when the application calls for it. Milwaukee also adds a variable position chisel stop, which lets you index the chisel to the angle you need instead of working around an awkward bit orientation.

The build is aimed at jobsite durability. The all-metal gear case is there for long-term wear resistance, and the mechanical clutch helps protect the motor and drivetrain if the bit catches. That kind of protection matters when you're drilling larger holes, coring, or working in older concrete where aggregate and rebar can make the bit grab unexpectedly.

Milwaukee's AVS Anti-Vibration System is another feature that matters in real use, especially for overhead drilling and repetitive fastening or anchoring work in masonry. Lower vibration helps reduce hand and arm fatigue and gives you better control when you're trying to keep the bit on location. At 12.5 inches long and 7.5 lbs, this tool stays compact enough to work in tighter spots while still delivering the kind of impact energy expected from a serious corded demolition drill and rotary hammer.

From a practical standpoint, the SDS Plus chuck gives you access to a broad range of common masonry bits and chisels. That is important for service electricians, plumbers, general contractors, remodelers, and concrete crews who already run SDS Plus accessories and want quick bit changes without a keyed chuck. The included side handle and depth rod also make it easier to control the tool and repeat hole depths for anchors and drop-ins.

This Milwaukee rotary hammer is best for users who need a dependable corded tool for drilling in concrete, block, and masonry without dealing with battery runtime. It is a strong fit for commercial build-outs, overhead anchoring, mechanical rough-in, and punch-list demo. If your work regularly involves larger-scale chipping or heavy demolition all day, you would step up to a bigger hammer. But for drilling speed, manageable size, and all-around utility, this is the kind of corded SDS Plus rotary hammer that earns its place fast.

A solid corded SDS Plus workhorse

The Milwaukee 1-1/8 In. SDS Plus Rotary Hammer Kit gives you real drilling and chipping performance in a size that is still easy to control.

• Who it's for: Contractors and serious DIY users who drill concrete regularly and want a corded rotary hammer for anchors, overhead work, and light demolition.
• Why it stands out: The mix of 3.6 ft-lbs of impact energy, AVS vibration control, a mechanical clutch, and an all-metal gear case gives it the features that matter when the tool actually gets used hard.
• Worth knowing: This is a strong all-arounder, not a full-size demo hammer. If your day is mostly heavy chipping, go bigger. If your day mixes drilling with occasional chisel work, this is right in the pocket.

• What type of accessories does this tool use? It uses SDS Plus bits and chisels.
• How much impact energy does it deliver? Milwaukee lists this rotary hammer at 3.6 ft-lbs of impact energy.
• Does it have multiple operating modes? Yes. It has rotary hammer, hammer-only, and rotation-only modes.
• Is this a corded or cordless tool? This is a corded rotary hammer with an 8-amp motor.