LAGUNA MLAREVO1524110 REVO 15|24 Lathe 110V
Earn Tool Nut points on this item!
- World-class fit and finish
- Sliding headstock for ergonomic outboard bowl turning
- Infinite electronic variable speed from 50 - 4200 RPM with a 3 step pulley
- Extraordinary torque even at low speeds, powered by Pulse Width Modulation
- Adjustable-height legs for a more ergonomic working position
- Steel bed provides strength, stability and a surface that the banjo will glide across smoothly
- Patent-pending Precise Point allows you to dial in the tailstock quill to meet with the headstock center
Buy it with
Product Details
With The Launch Of The Revo 15|24 Laguna Is Filling The Gap Between The Revo 12|16 & The Legendary Revo 18|36, Providing Space Constrained Users With More Power And Capacity. The Laguna 15|24 REVO Lathe Provides More Power And Capacity In A Constrained Space While Plugging Into A Standard 110V Outlet (15 Amp Service Required).
The Headstock, Banjo And Tailstock Are Fully Removable From The Bed. The Tailstock Features On-Board Tool Storage For The Live Center And Drive Center (Included). A Tool Shelf Mounts To The Left Of The Headstock With Storage For The Knockout Bar And Other Lathe Tools.
The Headstock Can Be Repositioned To The Tail End Of The Bed For Outboard Turning. The Optional 20” Extension (Item #172165, Sold Separately) Can Expand Your Outboard Turning Options.
A 24-Position Indexing Plate Allows The Headstock To Rotate In 15° Increments. The Headstock And Tail Stock Accept An MT2 Taper.
Precise Position Adjusts The Spur Drive For The Ideal Point-To-Point Alignment Between The Drive Center And The Drive Center. This Simple Adjustment Of 4 Screws And Minor Manipulation Of The Drive Center Brings Your 15|24 Lathe Into Ideal Alignment For Turning.
The PWM (Pulse Width Modulation) Motor Utilizes Transistors For Fast Communication Between The Motor And Controller. PWM Controls Stabilize The RPM And Provide Consistent Torque (Voltage) When Using Speeds At Low RPM So You Can Turn With Confidence At Any Speed On The Laguna REVO 15|24 Lathe.
Adjustable Legs Allow You To Set The Height Of The 15|24 Lathe At Just The Right Height. Leveling Feet Provide Micro Adjustments To Properly Level The Lathe.
Includes Banjo, 12” Tool Rest, Drive Center, Live Center, Faceplate, Face Plate Wrench and Knock Out Bar.
Upgrade your 15|24 REVO Lathe with a wheel system to move it around the shop, a 20” steel extension that fits in two positions for increased spindle or turning capacity or an LED Lathe Lamp featuring Chameleon hot/cold to configure perfect work lighting for your shop.
- Electrical: 1.5HP, 110 Volt, 8 Amp, 60 Hz.
- Motor: Permanent Magnet DC, 2150 RPM
- PWM: Pulse Width Module Speed Control
- Recommended Breaker: 15 Amp
- Swing over Bed: 15-1/2''
- Swing over Banjo: 11-3/32''
- Max. Outboard Swing with Optional Bed Extension (#64726): 25''
- Tool-Rest Post Size: 1''
- Tool-Rest Length: 12''
- Spindle Taper: MT#2
- RPM High: 650-4200
- RPM Mid: 325-2100
- RPM Low: 50-650
- Tailstock Quill: 4-1/2'', Self-Ejecting
- Floor to Spindle Center Low: 36.4''
- Floor to Spindle Center High: 51.4''
- Floor to Bed Min.: 28.6''
- Floor to Bed Max.: 43.6''
- Front Bearing: TPI Taiwan 6206LLU
- Rear Bearing: TPI Taiwan 6205LLU
- Spindle Index #: 24 w/Lock
- Distance Between Centers: 24''
- Headstock/Tailstock Through-Bore: 3/8''
- Headstock Travel: Full Length
- Spindle Size: 1-1/4'' X 8TPI RH
- Floor Space: 60''W x 22''D x 56''H
- Box Dimensions: 52''L x 22''W x 22''H
- Weight Net/Ship: 288/302 Lbs.
WARNING: California residents, see information about Proposition 65