Makita GRH08M1W 40V max XGT Brushless Cordless 1-3/16" SDS-PLUS AVT Rotary Hammer Kit w/Dust Extractor, AFT, AWS Capable (4.0Ah)

The 40V max XGT® Brushless Cordless 1-3/16" AVT® Rotary Hammer Kit w/ Dust Extractor accepts SDS-PLUS bits, AFT®, AWS® Capable (model GRH08M1W) is a cordless concrete solution designed for heavy-load applications. It delivers the power, speed, and run-time for corded demands, without the cord.The GRH08M1W is powered by a 40V max battery with a Makita-built brushless motor that combines to deliver the power and performance required for heavy-load applications. It can deliver up to 135 of 3/8" holes using a fully charged 40V XGT® 4.0Ah battery*. The variable speed dial and trigger enable the user to match the speed to the application.This hard-hitting performance is combined with advanced comfort and convenience features including Active Feedback-Sensing Technology (AFT®), which electronically turns off the motor if the bit rotation is suddenly forced to stop. It is also equipped with Anti-Vibration Technology (AVT®) for reduced vibration. More than just a padded handle, AVT is an internal counterbalance that uses air pressure to move counterweight pistons in the opposite direction of the drive piston to actively reduce vibration. In addition, the vibration-absorbing back handle and side handle are engineered to further reduce vibration. For added durability in harsh job site conditions, Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance.The GRH08M1W has dust extraction capability and is OSHA Table 1 compliant with an on-board HEPA Dust Extractor or stand-alone AWS® Extractor options. For added efficiency, the Rotary Hammer is equipped with Auto-Start Wireless System (AWS®), which uses Bluetooth® technology for wireless power-on and power-off communication between the equipped tool and dust extractor (sold separately). Once connected via AWS, the AWS-equipped dust extractor will automatically power on or off when the AWS-equipped cordless tool starts or stops, running only when the tool is in use. This increases productivity on a single charge and reduces continuous noise at the job or work site.Constant speed control automatically applies additional power under load for optimum performance. The torque limiting clutch is engineered to prevent gear damage by automatically disengaging the gears if the bit binds, and constant speed control automatically adds power to the motor to maintain speed under load to complete the most demanding jobs.Additional performance features include an electric brake, a built-in L.E.D. light, and an ergonomic soft-grip handle with a large 2-finger trigger that provides increased comfort on the job. It also features a retractable hook that allows the tool to be secured when not in use.It has 3-modes of operation "Rotation Only", "Hammering with Rotation" or "Hammering Only" for multiple applications. The GRH08M1W is ideal for a range of trades including mechanical/electrical/plumbing contractors, concrete contractors, road and bridge contractors, utility workers, pest control, maintenance operations, and more. It accepts SDS-PLUS bits.XGT is a system of equipment, tools, batteries, and chargers utilizing 40v max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart, and outlast the rest.*Tested 2-3/8" deep holes in 5,000 PSI concrete

• POWER - Brushless motor along with 40V max XGT® battery combine to deliver the power for heavy application
• CONTROL - AFT® electronically turns off the motor if rotation of bit is suddenly forced to stop
• COMFORT - AVT® is a counterbalance system along with vibration-absorbing handles that work to reduce vibration
• DUST MANAGEMENT - Dust extraction capability with OSHA Table 1 compliant on-board HEPA Dust Extractor
• INCLUDES - (1) 40V max XGT® Lithium-Ion 4.0Ah battery, charger, dust extractor, side handle, grease, towel, tool bag
• Makita-built brushless motor along with 40V max XGT® battery combine to deliver the power and performance required for heavy-load applications
• Constant speed control automatically applies additional power under load for optimum performance
• Overload protection is designed to protect the motor from burnout in abnormally high torque situations
• XGT® technology delivers up to 135 of 3/8" holes using a fully charged 40V XGT® 4.0Ah battery
• Active Feedback-Sensing Technology (AFT®) electronically turns off the motor if rotation of bit is suddenly forced to stop
• Anti-Vibration Technology (AVT®) is an internal counterbalance system along with vibration-absorbing handles that work together to reduce vibration
• Dust extraction capability with OSHA Table 1 compliant on-board HEPA Dust Extractor or stand-alone AWS® Extractor options
• Auto-Start Wireless System (AWS®) which utilizes Bluetooth® technology for wireless power-on/off communication between tool and dust extractor
• Built-in L.E.D. light with an independent on/off illuminates the work area