Supermax 60-9150 150-Grit: Bulk Pre-Marked Roll, Aluminum Oxide

$149.99
Ships from manufacturer - Usually ships in 3 - 5 days
Fast Free Shipping

Earn Tool Nut points on this item!

  • Bulk abrasive roll, pre-marked with cut lines for all models of SuperMax, Performax, JET and General (24/25″) Drum Sanders.

Product Details

See the chart below for the approximate number of wraps per roll for each model. Please note that these rolls are not pre-marked for 19” models.

Aluminum oxide is the most common abrasive in woodworking sandpaper. It works well on a number of materials, including bare wood, painted surfaces, and metal. In its most basic form, this furnace-produced mineral does not fracture easily. Instead, it tends to wear down until it becomes too dull to cut efficiently. More expensive forms are friable or semifriable.

A number of companies offer more than one grade of aluminum oxide in sandpaper. More expensive, heat-treated versions of the mineral tend to go into higher-priced product lines. With its familiar brown and black flecks, generic aluminum These sandpaper rolls provide multiple replacements for your drum sander.Cut your own taper and save on aluminum oxide sandpaper rolls.

Polyester cotton X weight backing extends the life of the sandpaper roll.

24 and 36 Grit60 Grit and Finer
10″ drum = 23 wraps10″ drum = 31 wraps
16″ drum = 14 wraps16″ drum = 19 wraps
22″ drum = 10 wraps22″ drum = 14 wraps
25″ drum = 9 wraps25″ drum = 12 wraps
37″ drum = 6 wraps37″ drum = 8 wraps
50″ drum = 4 wraps50″ drum = 6 wraps

WARNING: California residents, see information about Proposition 65

Write a Review
You're reviewing:Supermax 60-9150 150-Grit: Bulk Pre-Marked Roll, Aluminum Oxide
Your Rating
Questions & Answers
No Questions